|
|
21-04-14, 12:49 PM
|
#1
|
Site Owner
Join Date: Jul 2007
Location: Waterlooville, Hants
Posts: 24,098
|
Smoking!
Well that was a short Bank Holiday trip in the zed, funny smell coming from the car and some juddering. Then under braking it was squirming a bit so pulled over into a cul-de-sac and from the offside wheel arch bellowing smoke! Seized brake caliper, nearly on fire! Strange as Goodwood was hard on the brakes but survived okay and did the round trip to Longbridge, you never know what's around the corner! So for the second time in 9 years it was recovered back home by the AA (1st was the clutch slave).
SO does anyone have any quality ideas on brake upgrades, nothing bodgy please as looking for an upgrade after Goodwood where I found the limits of the standard set-up even with Mintex, DOT 5.1 and stainless hoses.
__________________
------------------------------
------------------------------
__________________
Some useful links:
|
|
|
21-04-14, 01:14 PM
|
#2
|
Member
Join Date: Sep 2012
Location: Chester
Posts: 2,581
|
I'm going for the brembo conversion.
Maybe something to look into or gbe do a wilwood conversion do they not?
And I'm sure ATR/ITR fronts would go on somehow.
|
|
|
21-04-14, 01:57 PM
|
#3
|
Member
Join Date: Feb 2008
Location: UK
Posts: 10,493
|
Are you looking for a caliper upgrade or just a stronger pad/disc combo?
__________________
Former custodian of the legend that was FE54 - RIP
|
|
|
21-04-14, 02:01 PM
|
#4
|
technically an expertish
Join Date: Jun 2008
Location: Clydebank, Glasgow
Posts: 7,902
|
Mick try pull the caliper off and pump the piston to nearly out, had ome last week that was just dirty and that was why it wouldn't go back on, same thing brakes smoking, 2 mins with some wd40 and a brush and all was good
__________________
------------------------------
------------------------------
|
|
|
21-04-14, 04:42 PM
|
#5
|
Site Owner
Join Date: Jul 2007
Location: Waterlooville, Hants
Posts: 24,098
|
I need to look at going 4 pot now that I have hit the wall with the OE set-up, I do not think a change of material will give me that extra confidence, however I will try it first before writing them off.
Yes I will strip and clean them regardless as it was fine on the round trip to PoL so may have picked something up.
__________________
------------------------------
------------------------------
__________________
Some useful links:
|
|
|
21-04-14, 05:33 PM
|
#6
|
Technical Expert R.I.P.
Join Date: Aug 2007
Posts: 9,239
|
I would say Brembos, that's based on cost, performance, and durability, other kits are available from GBE, and Reyland.
The Brembo kit is not a 100% direct swap, you may need wheel spacers and extended studs if your wheels won't clear the calipers, when I fitted mine I wanted to keep the mk2 11 spokes, the problem is they have no clearance without spacers, life would have been a lot simpler if I'd used wheels with more clearance, something like OZ Ultralegs, or Superlegs would have probably fitted without spacers and longer studs.
__________________
------------------------------
------------------------------
__________________
It never got fast enough for me
Hunter S Thompson
R.I.P. Peter David Scott 18.07.59 to 21.11.16
Will be missed by us all but we will always remember you.
|
|
|
21-04-14, 05:53 PM
|
#7
|
Site Supporter
Join Date: Aug 2008
Location: Bristol
Posts: 6,835
|
Happened to me once on a trip from Bristol to Salisbury. By Bath the front pads were smoking pretty bad, managed to drive the remaining 40 odd miles on purely engine braking and the handbrake! lol
I'd recommend the brembo setup although believe you may have clearance issues with the mk1 wheels.
__________________
------------------------------
------------------------------
__________________
James
2012 BMW 320d Sport
|
|
|
21-04-14, 06:29 PM
|
#8
|
Member
Join Date: Mar 2010
Location: Harlow, Essex
Posts: 4,297
|
Just as it was back on the road lol.....It was trying to keep up with Pete on theM40 that did it.......................................
|
|
|
21-04-14, 07:04 PM
|
#9
|
Site Owner
Join Date: Jul 2007
Location: Waterlooville, Hants
Posts: 24,098
|
I have Pro Race 1.2s so should have enough clearance I would have thought?
__________________
------------------------------
------------------------------
__________________
Some useful links:
|
|
|
21-04-14, 07:16 PM
|
#10
|
Technical Expert R.I.P.
Join Date: Aug 2007
Posts: 9,239
|
The 1.2's look very promising for clearance.
__________________
------------------------------
------------------------------
__________________
It never got fast enough for me
Hunter S Thompson
R.I.P. Peter David Scott 18.07.59 to 21.11.16
Will be missed by us all but we will always remember you.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT. The time now is 11:49 AM.
|