|
|
20-01-13, 07:07 PM
|
#1
|
Member
Join Date: Jan 2010
Location: stenhousemuir,falkirk
Posts: 3,962
|
if i didnt have bad luck id have no luck at all
well it seems its the zrs turn to play funny buggers,last week or so,on startup has been running on 3 cylinders,for about 30 sec,runs fine,but ive noticed that its drank nearly 2 tanks of coolant,it sounded like something was shorting out in the engine bay,whilst running,on first check for codes i got po304 misfire on cylinder 4,over the weekend i have had a gradual mayo on dipstick and under the cap,kel drove it today for 5 miles,and sayed engine management light was flashing twice,went out checked codes and got po303,po313,misfire on cylinder 3,misfire with low fuel detected,this is all i need after the zs giving up the ghost,rant over lol
|
|
|
20-01-13, 07:18 PM
|
#2
|
promoted bloke!
Join Date: May 2008
Location: bournemouth
Posts: 16,801
|
Dont sound good.
Not inlet manifold, or a coolant pipe leaking and a dodgy spark plug, or electrics to the plug??
__________________
------------------------------
------------------------------
|
|
|
20-01-13, 07:25 PM
|
#3
|
Member
Join Date: Jan 2010
Location: stenhousemuir,falkirk
Posts: 3,962
|
changed img last feb,there is a pipe leaking at the back but its tight as hell,cant even move the pipe up anymore,seriously hoping its not all bad,checked plugs etc today all look ok,but i also noticed im getting no hot air,until i rev the car,and the temp sensor goes down,its like the thermostats jammed open again
|
|
|
20-01-13, 08:33 PM
|
#4
|
promoted bloke!
Join Date: May 2008
Location: bournemouth
Posts: 16,801
|
Could be the water leak is letting the air in and causing an air lock in the heater.
Do they have those coil packs??? or leads that could break down.
__________________
------------------------------
------------------------------
|
|
|
20-01-13, 09:45 PM
|
#5
|
its ginger its phenomenal
Join Date: Jul 2007
Location: Cumbertoon
Posts: 8,141
|
Marcus was telling me about the problems earlier Andy.this sucks mate.hope its not anything serious.
__________________
<iframe src="http://gamercard.xbox.com/grimmy1973.card" [="" sigpic]=""></iframe>
|
|
|
21-01-13, 03:55 AM
|
#6
|
Member
Join Date: Jan 2008
Location: Bolton
Posts: 1,852
|
thats exactly the same symptoms as my ZT had m8 new IMG and all was good again it was leaking in to cylinder 4 as in the image
|
|
|
21-01-13, 06:01 AM
|
#7
|
Site Ambassador
Join Date: Jul 2007
Location: Fort William
Posts: 5,458
|
what a ******* Andy, hop it is what Alan says ^^ heres hoping you get some guid luck soon bud
__________________
------------------------------
------------------------------
__________________
Metro VVC
|
|
|
21-01-13, 09:21 AM
|
#8
|
promoted bloke!
Join Date: May 2008
Location: bournemouth
Posts: 16,801
|
Great pic Alan.
Glad your one is sorted, Alan and hope you can sort your problems Andy. Might be worth whipping the inlet off just to make sure.
I saw a cheap endescope on ebay the other day, wonder if you could have a look at the bore.
Just googled it and found this, nice bike by the way. http://www.youtube.com/watch?v=ee7Pr4XsDGw
Might shop if any water getting into number 4.
Or is this a bad idea, and wouldnt work???
__________________
------------------------------
------------------------------
|
|
|
21-01-13, 02:26 PM
|
#9
|
Member
Join Date: Jan 2010
Location: stenhousemuir,falkirk
Posts: 3,962
|
i emailed a place as i have cover for mechanical breakdown,so its now in the good hands of goldie,they said ive to get him to diagnose the problem then phone them,so it should get sorted fairly soon
|
|
|
21-01-13, 03:05 PM
|
#10
|
Member
Join Date: Oct 2009
Location: Cumbernauld
Posts: 2,861
|
Feel for you buddy, hope it's nowt nasty.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT. The time now is 07:39 AM.
|