|
You can use a PG1 from any T series, L series. or KV6, the PG1 from k4 engine cars won't fit because of a different bolt pattern on the bell housing.
180 Drive shafts are a non starter, they're the wrong length, and the drivers side is a 2 piece shaft, either 420 petrol or diesel shafts will fit but you may need to swap the outer cv joints as the later abs system uses rings with 43 teeth, the early ones were 27 teeth
__________________
------------------------------
------------------------------
__________________
It never got fast enough for me
Hunter S Thompson
R.I.P. Peter David Scott 18.07.59 to 21.11.16
Will be missed by us all but we will always remember you.
|
Threaded Mode