|
|
13-06-12, 11:51 AM
|
#1
|
Member
Join Date: Sep 2010
Location: Arundel, Sussex
Posts: 2,058
|
long shot but need a help
Paid for the sheddist kit this morning and its being posted tomorrow so what do the oe hydraulics do... thats right fail!! its gone at the mounting bracket, master mounting bracket and the master has snapped... all this from one press this morning thankfully it was at the house.
Does anyone local.. ish have a spare set they can lend to me till I get and fit the kit?
I did this last time as well.. a right pita!
__________________
|
|
|
13-06-12, 12:08 PM
|
#2
|
Site Owner
Join Date: Jul 2007
Location: Waterlooville, Hants
Posts: 24,097
|
Well now you are an expert! I only have a master, but not local enough for you.
__________________
------------------------------
------------------------------
__________________
Some useful links:
|
|
|
13-06-12, 12:10 PM
|
#3
|
promoted bloke!
Join Date: May 2008
Location: bournemouth
Posts: 16,800
|
Think you can get a Landrover one off ebay. Dont know what the delivery is like.
__________________
------------------------------
------------------------------
|
|
|
13-06-12, 12:16 PM
|
#4
|
Member
Join Date: Sep 2010
Location: Arundel, Sussex
Posts: 2,058
|
haha yea.. at least this time it was at home, when it did it to the old zed it was the highstreet at rush hour haha.
Theres one on the bay I'm looking at now so I'm just gonna call them, thanks for the replys though guys.
__________________
|
|
|
13-06-12, 12:26 PM
|
#5
|
Member
Join Date: Sep 2010
Location: Arundel, Sussex
Posts: 2,058
|
How would I go about splitting the master and slave at the connection if I can find a good master?
__________________
|
|
|
13-06-12, 12:39 PM
|
#6
|
Site Owner
Join Date: Jul 2007
Location: Waterlooville, Hants
Posts: 24,097
|
It's a push-fit coupling, use a couple of small screwdrivers to release the joint.
__________________
------------------------------
------------------------------
__________________
Some useful links:
|
|
|
13-06-12, 03:37 PM
|
#7
|
Member
Join Date: Sep 2010
Location: Arundel, Sussex
Posts: 2,058
|
kind of like a gas one then? got to push that plastic sleve down right?
__________________
|
|
|
13-06-12, 03:43 PM
|
#8
|
Site Owner
Join Date: Jul 2007
Location: Waterlooville, Hants
Posts: 24,097
|
Yea, pull the collar back, remember it is under pressure so will be tight to disconnect, it has a valve fitted so will not pi$$ fluid out.
__________________
------------------------------
------------------------------
__________________
Some useful links:
|
|
|
13-06-12, 03:45 PM
|
#9
|
Member
Join Date: Sep 2010
Location: Arundel, Sussex
Posts: 2,058
|
Nice one I will do that if I find one with only a good master, cheers Mick.
__________________
|
|
|
13-06-12, 03:48 PM
|
#10
|
Site Owner
Join Date: Jul 2007
Location: Waterlooville, Hants
Posts: 24,097
|
If I were closer I would have a master you could use. Slave was busted.......as one would expect!
__________________
------------------------------
------------------------------
__________________
Some useful links:
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT. The time now is 02:50 PM.
|