VIS Indicators the third and final round!

[pucc]

All fitted

After fitting i've tried it, at 1st i had two red led's on if i plant my foot(not under load) i'm getting a constant red on the power vis. Also noticed the balance red led flickering.. What are your thoughts guys?

Andy

[Nobrainer]

Originally Posted by pucc

All fitted

After fitting i've tried it, at 1st i had two red led's on if i plant my foot(not under load) i'm getting a constant red on the power vis. Also noticed the balance red led flickering.. What are your thoughts guys?

Andy

I would imagine you have knackered vis motors or you haven't fitted it properly, but i reckon you probably wanted a bit more than that?

[MG ZS STE]

Originally Posted by pucc

All fitted

After fitting i've tried it, at 1st i had two red led's on if i plant my foot(not under load) i'm getting a constant red on the power vis. Also noticed the balance red led flickering.. What are your thoughts guys?

Andy

I had a flickering red on the balance and also the green would sometimes stay on permanently. It was an issue with the Vis and not the indicator kit. That's why these kits are so useful as they help Identify intermittent issues as well as dead motors.