Project - MK2 ZS 115 - 180 Kitted!

[Chaz]

Originally Posted by ZS Phil

Plans sound good but you might have trouble fitting the BRM knobs, I tried it on a MK1 ZS and they didnt fit properly.

Hmmm I did think they might not fit too well but iv seen a MK2 45 with BRM heater knobs so I dont know, il give it ago..

Gotta have all the centre console out now anyway... The bar connected to one of the heater knobs has jumped off, its stuck on blowing at your feet :lol:

[petet16]

For the blowing feet have a check on the drivers side of the heater box, you can access the 2 cables and levers from the drivers footwell.

[Chaz]

Originally Posted by petet16

For the blowing feet have a check on the drivers side of the heater box, you can access the 2 cables and levers from the drivers footwell.

I turned it form the windscreen to your face and I felt the cable pop off and the knobs just spins freely now so I know how to sort it, can you get them from the bottom then?? Or do you mean the ones to the heater flaps under the dash?

[petet16]

Originally Posted by Chaz

I turned it form the windscreen to your face and I felt the cable pop off and the knobs just spins freely now so I know how to sort it, can you get them from the bottom then?? Or do you mean the ones to the heater flaps under the dash?

Ah, if the knob is spinning it has probably come off the back of the heater control panel, which will need the centre console removing to reach them

[Chaz]

Originally Posted by petet16

Ah, if the knob is spinning it has probably come off the back of the heater control panel, which will need the centre console removing to reach them

Thats what I thought, lovely

I might get some black carbon effect wrap and wrap my centre console while its all out.. Its scratched to death..