ZS MK2 Numberplate Bulb holder

[petet16]

I've just looked at your pics, they don't look like the original lights.

[ZS]

Originally Posted by petet16

I've just looked at your pics, they don't look like the original lights.

No, hence my initial question... also you can see the loom has been cut and replaced with those spade connector crimp things...

So Ideally I need someone who is breaking a MK2 ZS Saloon! so I can get the bulb holders and a bit of wiring loom to repair this... Apparently any MK2 ZR, ZS, 25 or 45 will do!

[petet16]

It looks like it, as long as they haven't cut the mounting about to make the replacement lamps fit

[ZS]

Originally Posted by petet16

It looks like it, as long as they haven't cut the mounting about to make the replacement lamps fit

Paint appears to be untouched on the bumper and the hole looks factory cut rather than Stanley knife cut... hmmm since its only a tenner for the two holders I might just buy them and work out a new way to fit to the loom...

[ZS]

Originally Posted by petet16

It looks like it, as long as they haven't cut the mounting about to make the replacement lamps fit

Yes... well despite what I said earlier... The holes are way to big for the OE lamps, so stuck what to do now!

One of the "cobbled together units" is totally fried, even replacing the bulb (which took 30 mins to do) didn't get it to light up again!

Now as this is an MOT failure I guess I have five options...

1. Find some replacement fixings of the same size as these duff ones
2. Make up some sort of bracket to hold the OE lights in place (although no idea how to do that, I don't have a 3D printer or manufacturing equipment)
3. Replace the whole bumper - Guessing this would be very expensive!!
4. Use some MK1 fittings and self tappers to fix it to the bumper (fine for short term but will destroy the bumper further and be a pain to change bulbs in future)
5. Hand the car to a body shop and get them to fix the OE units in place

So, unless someone has a MK2 Rear bumper in Black locally going for cheap.... I will have to give this some thought!