stainless/zinc arch liner screws

[POMPSKI]

Let me know how you get on, if these are all correct I'll be eternally grateful!

Doing this has been on my to-do list for ages.

[maxtherotti]

I should add mine is a mk1 not sure off the top of my head if mk2 is the same (but i think it is)

Rob

[maxtherotti]

Originally Posted by POMPSKI

Let me know how you get on, if these are all correct I'll be eternally grateful!

Doing this has been on my to-do list for ages.

Screws and bolts ordered will let you know how it goes

Rob

[maxtherotti]

Ok so I ordered up some bolts and its good news
The 4 for the bonnet catches are m6 x30mm
the rest i got are m6 x 20mm
I still need to get 2x m6x25mm for the 2 bolts holding the air filter to slam panel but the rest look ok
I got them as flanged button head in stainless as per the links a few posts back
oh and the stainless self tappers i ordered are bang on size wise just need to get a few stainless penny washers for behind the screws to hold the arch liners more securely
I also am going to try to replace the plastic arch liner clips with stainless bolts in the centres as it will work out cheaper than buying new plastic clips so will let you all know how it goes with that

Cheers Rob

[talkingcars]

Originally Posted by maxtherotti

I should add mine is a mk1 not sure off the top of my head if mk2 is the same (but i think it is)

Rob

Under the bonnet is the same for both versions.

I replaced most of them on the mk1 and the F, shall be doing the mk2 soon.