Need help again :(

MG ZS STE · 23-07-13, 06:05 PM

All I could find was a post on XPF, and it may not work on 180s. But I won't cost you owt to try. I'd also try to eliminate your throttle cable isn't sticking. Also I have a spare IACV gasket if your stuck (for cost). I've cleaned my IACV before and reusing the gasket is not advisable.

"Try reseting the throttle closed position by turning ign on to 2, pump the pedal 5 times, then start without any throttle after 5 secs".

talkingcars · 23-07-13, 06:10 PM

Quote:

Originally Posted by MG ZS STE

All I could find was a post on XPF, and it may not work on 180s. But I won't cost you owt to try. I'd also try to eliminate your throttle cable isn't sticking.

"Try reseting the throttle closed position by turning ign on to 2, pump the pedal 5 times, then start without any throttle after 5 secs".

Ignition to position 2, fully depress and release the accelerator peddle 5 times and wait until the stepper motor stops adjusting, then start the car.