its finally all done tb zs or carbon plenum

[Maxfly]

I suppose the good thing is that you know what the problem is, as you say it is just finding the leak. I would hope upon a good poke around it would show itself fair quickly and may just be a split pipe or needing a clamp done up

[Supercharged_Z]

prob a high pressure hose if you have lost it all

[tb steve]

i have not had a look yet just wished it was done right the first time

[Supercharged_Z]

Originally Posted by tb steve

i have not had a look yet just wished it was done right the first time

I agree with that. just adds to your frustration. I had it with my supercharged car a few times.

[tb steve]

ok my bad there is loads of fluid in there looked like there was none

so it's the fuse or the pump ??
if its the fuse will have to go bigger again there was a 20amp in there but it was getting hot so jim stuck a 40amp in there but we are not sure if the pump is a 40amp one or not

ive got a mate bring in a multi meter tomorrow

[petet16]

You have electric pas ?.

[petet16]

Standard zs pas has no fuses, I'm confused. !

[Mark S]

Originally Posted by talkingcars

but the standard ZS doesn't have EPAS.

Originally Posted by petet16

Standard zs pas has no fuses, I'm confused. !

its an elctro hydraulic pump, hence ehpas.

similar to astra mk4, merc w168 etc.

there is no room for pas when fitting the wsr tb.

[petet16]

Thanks for clearing that up, the op didn't mention it was a non standard set up.

[tb steve]

Originally Posted by petet16

Thanks for clearing that up, the op didn't mention it was a non standard set up.

sorry oppps