Now I've swapped/modified engines I'm left with a few bits and pieces that are of no use to me. I thought I'd give the forum first dibs on anything that may be of any use to anyone. All offers considered...
PG1 Gearbox - 74,000 miles, runs perfectly. No longer of any use to me as I now have the 620ti box in the car. Comes without clutch release/fork components, but these are all a straight swap...
x2 A/C pumps - no use to me as the air conditioning system has been removed from the car...
x3 OEM exhaust rubber hangers in good condition...
x2 auxiliary drive belts. These are used as well, but one of these has only covered 3,500 miles. Again, no use to me as the air conditioning system has been removed from the car so I now run a shorter drive belt. Ideal as spares I guess?....
Front & rear coil packs and HT leads. These are the Brembi front mounted coils that are used on the earlier engines...
x2 auxiliary drive belt idler pulleys. Again I don't require these due to the a/c removal...
x1 Catch Tank with 9mm unions. I've altered a few things on this, it's a completely sealed unit with an RTV gasket sealing the top and bottom parts together to keep it air tight. The plastic sight glasses have been removed and plugged. A few marks here and there on it as you'd expect...
There will be more stuff soon, obviously everything has been used but is in good working condition. Ideal stuff to keep as spares I guess?
Last edited by top_man_eldo; 21-02-15 at 02:29 PM.
Linear Mode
