Quote:
Originally Posted by Bakermgzs
Right I found out the plates are 2.2m thick each head,I tried fitting a smaller idler pully today and was so much easyer to set the tensioner the belt is still trying to slip of the cam pullys but alot slower so final resort I'm going to weld a small lip on end the cam pullys
|
Dean,
I think you just going to have to keep an eye on the whole setup. @4.4mm its a whole tooth thats being taken up before you even start.
As we discussed you also have to watch the tension thats being applied to the water pump.
How much smaller is the one you have now fitted?
cheers
P.
Threaded Mode