|
Finally got the engine back together this weekend and topped up all fluids.
Car initially fired up with a very obvious missfire, turns out one of the HT leads was not pushed in firmly enough.
Once that was sorted the engine runs, but not as smooth as I would like... There is a very slight lumpiness to the engine and it seems to threaten to stall every now and then.
Since this appears to be the Mems 1.6 ECU (Dizzy engine from a 420 Turbo) I can't just put it on my normal Diagnostics.
To this end, does anyone, localish to Bordon, have a T4 or PScan or another Diagnostics that will connect to the Rover 3-pin plug on the ECU so I can check all the sensors etc? I am hoping that will tell me, or at least guide me, to the root of the "something is not quite right".
__________________
------------------------------
------------------------------
|
Hybrid Mode
