"The Project"

[Maxxed_Ross]

Time for another mini-update I suppose

The front brakes are more or less finished being machined. But when we went to put everything together on the bench the standard ZS wheels that I was hoping to use as a stop gap don't fit over the BTCC brakes! Monumental Epic Fail on my part there...

So it looks like the centre lock wheels are back in the picture again. Efforts are being made as we speak to make bespoke hubs with the long centre stud

[Ritchy]

woooo, kinda, think itll be worth the exra work ross

[peterzs]

Have no idea what the BTCC front hubs are like, but no chance the MGB/RV8 front splined hubs would fit, or be man enough for the torque.

Just a thought, as it seems most of our ZS bits come out of some parts bin or orther, from the old Rover days!!!!

[Drew]

ive got a very good m/c shop down here if you need anything?

Drew

[BUCKYDEVIL]

So are you getting your Very own custom wheels then ?
Is there no resource for you to get BTCC wheels for the hubs.?

[Maxxed_Ross]

Originally Posted by peterzs

Have no idea what the BTCC front hubs are like, but no chance the MGB/RV8 front splined hubs would fit, or be man enough for the torque.

Just a thought, as it seems most of our ZS bits come out of some parts bin or orther, from the old Rover days!!!!

The ZS hubs are the same as Honda Integra I think, but when I looked into those hubs I was going to have exactly the same problem fitting those as I would the ones I was going to get from WSR. Because they were custom machined they don't fit any of the standard suspension points

Originally Posted by Drew

ive got a very good m/c shop down here if you need anything?

Drew

I might need to take you up on that, the guy up here can do it but he's taking an age to do it. The car has been on axel stands since May now

Originally Posted by BUCKYDEVIL

So are you getting your Very own custom wheels then ?
Is there no resource for you to get BTCC wheels for the hubs.?

I looked into custom wheels and had Compomotive all lined up and ready to go, but the offset required (-20 I think it was) was going to put a hell of a stress on the rest of the hub components... and spacers for the standard wheels are out because the brakes foul them.

I already have 2 sets of BTCC wheels in the garage, the problem I had was that my hubs were a botched hybrid of the BTCC centre stud and a standard ZS hub welded together. It didn't look right and after all this work I didn't want to risk a failure half way round a corner.

Sooooo the whole thing has gone full circle and I'm having mu own bespoke hubs made up to fit the original BTCC wheels - complete with centre lock nuts

At this rate the brakes and hubs are going to cost more than my original budget for the whole build... so that should give an idea of how insane this has become now

[Supercharged_Z]

if i was you Ross, i would of gone to the Brembo setup from rovertech, 4 pots, 330mm disks easy peasy!! real good stoping power

[BUCKYDEVIL]

Knowing what you've overblown your budget by and adding up total cost so far,
Would you have still started this in hindsight ?
It is an outstanding project and fair play to you for seeing it through but was there ever a point you felt like dumping the dream ?

[peterzs]

The other way of looking at it is that it will be a one off, and you cant really put a price on it.

Good luck to Maxxed Ross and hope its soon sorted.

[BUCKYDEVIL]

Originally Posted by peterzs

Good luck to Maxxed Ross and hope its soon sorted.

And so say ALL of us..