|
|
13-01-13, 09:26 AM
|
#11
|
Site Owner
Join Date: Jul 2007
Location: Waterlooville, Hants
Posts: 24,097
|
Depending upon the glass specification used it has at least twice the density of polycarbonate in toughened form. In most instances the doors are removed of all hardware and internal skins so this coupled with the change to polycarbonate make considerable savings. However the main point here is the safety aspect where glass is removed just leaving the laminated front screen inplace. Polycarbonate being impact and shatter resistant.
__________________
------------------------------
------------------------------
__________________
Some useful links:
|
|
|
13-01-13, 10:07 AM
|
#12
|
Member
Join Date: Aug 2010
Location: Falkirk
Posts: 938
|
I agree gents but you are way way ahead of yourselves. The boy is running a cheap track car, I mean cheap with every respect please don't take offence to that. Taking the glass out on this car and fitting polycarbonate at "this time" will make no noticeable difference. None. Time and money spent elsewhere will benefit the car far more.
When you get to the other end of the spectrum, grams make kilograms and every wire, nut bolt and dod of sealer counts. This is not the case here. Take a 4mm bit of poly against a window pain and there's hardly any difference.
__________________
|
|
|
13-01-13, 12:59 PM
|
#13
|
Site Owner
Join Date: Jul 2007
Location: Waterlooville, Hants
Posts: 24,097
|
No I agree, it is better spent elsewhere at this stage. When someone is at the point of chasing dead weight then this is a place to go as it'll be half the weight of the standard glass fitted.
__________________
------------------------------
------------------------------
__________________
Some useful links:
|
|
|
13-01-13, 02:41 PM
|
#14
|
Member
Join Date: Sep 2012
Location: Dumbartonshire
Posts: 610
|
Quote:
Originally Posted by ZRed
I agree gents but you are way way ahead of yourselves. The boy is running a cheap track car, I mean cheap with every respect please don't take offence to that. Taking the glass out on this car and fitting polycarbonate at "this time" will make no noticeable difference. None. Time and money spent elsewhere will benefit the car far more.
When you get to the other end of the spectrum, grams make kilograms and every wire, nut bolt and dod of sealer counts. This is not the case here. Take a 4mm bit of poly against a window pain and there's hardly any difference.
|
true, it is a cheap track car, as most things on it have been either 2nd hand or bought at no great expense. with the idea of fitting polycarbonate, was to save weight overall, as I agree that just swapping a windows for perspex is no great saving, but with the chance to remove the electric windows and all the other parts that go with it there is a small saving to have, but if its at the cost of £200 then no its not going to happen, and the money would definitely be spent better else where.
Quote:
Originally Posted by sneekyparrot
On there own they save a bit but u can't just look at a weight loss for the car and only change 1 thing, it just ain't worth it but strip the interior / electric windows / speakers etc etc and u can easily get the car around the 1000-1100kg mark.
Dump the abs and fit the lines inside the car, using a bias valve to control the rears for a start that setup weighs a ton!
I am pretty anal with this when I was building bikes, but with the vag I am starting at the front and working back. I am looking at every nut and bolt and bracket and what it does, if it ain't needed it comes off or is replicated in allot or carbon. If a bolt can be replaced with an alloy / ti item then it will be with only structural items being left as stock.
It's not for everyone and not everyone has these items to hand but u get my point I hope.
P.
|
I agree with you that if any weight can be saved, no matter how small, and if you have access to them at no, or little expense then why not? and that is my idea here, if its a job that can be done, and the cost is little then I think it should be done!
again the whole idea with the track car is cheep fun, good chance it wont end up with a set of cams and a fancy manifold due to cost, it will run pretty much standard with hopefully good brakes and suspension. so if any other gains could be had else where, then I'd be looking at they options.
cheers guys
|
|
|
13-01-13, 03:32 PM
|
#15
|
Member
Join Date: Jul 2012
Posts: 1,284
|
Quote:
Originally Posted by Cally180
but with the chance to remove the electric windows and all the other parts that go with it there is a small saving to have,
|
you could fix the rear glass in place and remove all the mechs, and convert the front drivers to manual and keep the fr pass electric, this will save a few kg.
You would only save an extra 4kg by changing the glass to polycarb.
The ignition barrel weighs 2.5kg, easy to remove and replace with a couple of switches and a start button.
the door cards weigh 2.6kg and can be replaced with 3mm foamex weighing 600g and costing just a few quid.
theres plenty to be going at and easier places to save weight first.
|
|
|
13-01-13, 03:44 PM
|
#16
|
its ginger its phenomenal
Join Date: Jul 2007
Location: Cumbertoon
Posts: 8,141
|
I have a set of rear winding mechs you can have.just lying cluttering up the garage.might save a kilo or two.
__________________
<iframe src="http://gamercard.xbox.com/grimmy1973.card" [="" sigpic]=""></iframe>
|
|
|
13-01-13, 03:46 PM
|
#17
|
Site Ambassador
Join Date: Feb 2008
Location: Scottish borders
Posts: 11,539
|
Couple of exlax the night before mate and you'll save the same amount of weight ....
__________________
------------------------------
------------------------------
__________________
------------------------------
------------------------------
|
|
|
13-01-13, 05:46 PM
|
#18
|
Member
Join Date: Sep 2012
Location: Dumbartonshire
Posts: 610
|
Quote:
Originally Posted by Dan1971
Couple of exlax the night before mate and you'll save the same amount of weight ....
|
haha! that's the rule!! its a clean shave, no take-away food and wear as little as possible
all in the name of saving weight! lo!
|
|
|
13-01-13, 07:16 PM
|
#19
|
Member
Join Date: Jun 2010
Location: South Glos
Posts: 160
|
Quote:
Originally Posted by Mark S
you could fix the rear glass in place and remove all the mechs, and convert the front drivers to manual and keep the fr pass electric, this will save a few kg.y
You would only save an extra 4kg by changing the glass to polycarb.
The ignition barrel weighs 2.5kg, easy to remove and replace with a couple of switches and a start button.
the door cards weigh 2.6kg and can be replaced with 3mm foamex weighing 600g and costing just a few quid.
theres plenty to be going at and easier places to save weight first.
|
Mark,
How would you fix the rear windows in place?
Regards
Ollie
|
|
|
13-01-13, 07:26 PM
|
#20
|
technically an expertish
Join Date: Jun 2008
Location: Clydebank, Glasgow
Posts: 7,902
|
Bond them
__________________
------------------------------
------------------------------
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT. The time now is 02:43 PM.
|