|
|
10-10-15, 09:03 PM
|
#1
|
Member
Join Date: Jul 2007
Location: Cambridge
Posts: 45
|
Mine passed again with no advisories, but only 694 miles since last one!
__________________
2003 MG ZS 120 STD 30k owned from new.
1995 Rover 214 SI 108k daily runner.
2014 Volvo V40 R-Design T3 21k
|
|
|
11-10-15, 06:54 AM
|
#2
|
Site Owner
Join Date: Jul 2007
Location: Waterlooville, Hants
Posts: 24,097
|
Quote:
Originally Posted by redzs
Mine passed again with no advisories, but only 694 miles since last one!
|
Hardly surprising with those miles
__________________
------------------------------
------------------------------
__________________
Some useful links:
|
|
|
17-12-15, 03:44 PM
|
#3
|
its ginger its phenomenal
Join Date: Jul 2007
Location: Cumbertoon
Posts: 8,141
|
Silver car has failed.as per usual the shitty rear brake calipers are a culprit and front to back brake lines excessively corroded and the real bombshell welding required to fill a hole at the front close to the jacking point .
__________________
<iframe src="http://gamercard.xbox.com/grimmy1973.card" [="" sigpic]=""></iframe>
|
|
|
17-12-15, 05:31 PM
|
#4
|
Member
Join Date: Feb 2008
Location: UK
Posts: 10,493
|
Quote:
Originally Posted by grimmy
...........and the real bombshell welding required to fill a hole at the front close to the jacking point .
|
It is becoming quite common for rust in this area, especially on later cars.
Mines gonna fail on the n/s/r caliper and horn (failed relay in the BCU I think), hopefully nothing else but I'll make full use of the 10 working days, 4 weekend days and 3 bank holidays days to sort it - it gives me an excuse to get out of the house over xmas - LOL.
|
|
|
21-12-15, 06:31 PM
|
#5
|
Member
Join Date: Feb 2008
Location: UK
Posts: 10,493
|
Quote:
Originally Posted by talkingcars
It is becoming quite common for rust in this area, especially on later cars.
Mines gonna fail on the n/s/r caliper and horn (failed relay in the BCU I think), hopefully nothing else but I'll make full use of the 10 working days, 4 weekend days and 3 bank holidays days to sort it - it gives me an excuse to get out of the house over xmas - LOL.
|
Didn't fail on the caliper which is strange as the hand brake is very slow to release, front pads and discs were an advisory.
It did fail on the horn
and RUST in the drivers wheel arch, I think I should laugh about this after my previous post, but I do have the MIG welder and 2 terms of C&G welding under my belt.......
It also went down on insecure exhaust (apparently a temp fix of cable ties isn't acceptable - LOL) and a leaking exhaust which is probably linked to the missing rubbers.
The last advisory was "coating on headlights but does not effect beam pattern". This is actually the usual UV damage they suffer from.
|
|
|
10-02-16, 04:47 PM
|
#6
|
Member
Join Date: Feb 2008
Location: UK
Posts: 10,493
|
Quote:
Originally Posted by talkingcars
It is becoming quite common for rust in this area, especially on later cars.
Mines gonna fail on the n/s/r caliper and horn (failed relay in the BCU I think), hopefully nothing else but I'll make full use of the 10 working days, 4 weekend days and 3 bank holidays days to sort it - it gives me an excuse to get out of the house over xmas - LOL.
|
Quote:
Originally Posted by talkingcars
Didn't fail on the caliper which is strange as the hand brake is very slow to release, front pads and discs were an advisory.
It did fail on the horn
and RUST in the drivers wheel arch, I think I should laugh about this after my previous post, but I do have the MIG welder and 2 terms of C&G welding under my belt.......
It also went down on insecure exhaust (apparently a temp fix of cable ties isn't acceptable - LOL) and a leaking exhaust which is probably linked to the missing rubbers.
The last advisory was "coating on headlights but does not effect beam pattern". This is actually the usual UV damage they suffer from.
|
There are traces of something else on the headlights, I guess someone refurbished and sprayed them with some lacquer but most has pealed off.
I replaced the exhaust rubbers, replaced the bolts on the cat and squared up the exhaust. Two weeks later one of the mounts from the cat has snapped at the weld!
When I checked the rust it was no more than a pin hole so until the weather gets better it's been filled and stone chipped.
It went back in today to a different garage who don't do MOTs - pass with advisories for front discs and pads (going to do them soon anyway) and failed mount on the cat (decat going back on anyway).
Next MOT is June on the F so a few months for maintenance and modifying.
|
|
|
10-02-16, 06:41 PM
|
#7
|
Site Owner
Join Date: Jul 2007
Location: Waterlooville, Hants
Posts: 24,097
|
The wife's MGF failed its yearly, both front lower arms worn and corroded, headlight poor, sidelight, emissions and insecure battery.
Well got two new arms delivered, not looking forward to doing those, subframe drop apparently. Got two good headlights coming via Paul Luti. Insecure battery had a talking to and now secure! Emissions is the new cat fitted in September, so that needs replacing under warranty. Now why couldn't this happen when I was out of work for three months when I had the time!
__________________
------------------------------
------------------------------
__________________
Some useful links:
|
|
|
17-12-15, 05:53 PM
|
#8
|
Member
Join Date: Nov 2015
Location: Bedford
Posts: 370
|
Quote:
Originally Posted by grimmy
Silver car has failed.as per usual the shitty rear brake calipers are a culprit and front to back brake lines excessively corroded and the real bombshell welding required to fill a hole at the front close to the jacking point .
|
Hope it wasn't like this one....
|
|
|
17-12-15, 04:49 PM
|
#10
|
promoted bloke!
Join Date: May 2008
Location: bournemouth
Posts: 16,800
|
Oops, not good grimmy, still the cars are getting on a bit.
Hope its doable.
Had a new caliper o/s/r got fed up with it sticking on.
__________________
------------------------------
------------------------------
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT. The time now is 05:31 AM.
|