|
|
22-12-13, 01:34 PM
|
#21
|
technically an expertish
Join Date: Jun 2008
Location: Clydebank, Glasgow
Posts: 7,902
|
Usually electrical connectors, i'd pull the seats and carpet out, if its running i'd take them to a decent valet shop and get them to vax and clean them out
__________________
------------------------------
------------------------------
|
|
|
22-12-13, 01:53 PM
|
#22
|
Site Supporter
Join Date: Sep 2008
Location: The Shire
Posts: 2,860
|
Sorry to hear of the damage.... it is my big fear driving a derv - which is why i still have my air intake really high up and in cone format rather than enclosed... far to scared of getting water in the engine after everything I have done and been through!
I have been very gad I have had sole use of my second car these past 6months as the ZS ended up being laid up due to other commitments...
__________________
------------------------------
------------------------------
__________________
Mods Fitted
Pipercross Filter; Full 2.5" 'Wingy' exhaust; Donny Custom Turbo outlet pipe; Custom injectors;
Uprated gearbox bearings; Helix Clutch; Quaife ATB; Upgraded clutch Hydraulics; FMIC; Ported Head; ARP headstuds; Leda coilovers; 'Brembodge' 326mm disks/DS2500 pads
Dieselpowered
Fitting Custom Hybrid Turbo (1856GTBv) & controller; Remap, swirlpot, lift pump
AMW Motorsports
Custom exhaust manifold & downpipe
|
|
|
22-12-13, 01:54 PM
|
#23
|
Member
Join Date: Sep 2012
Location: Chester
Posts: 2,581
|
Quote:
Originally Posted by Ritchy
Usually electrical connectors, i'd pull the seats and carpet out, if its running i'd take them to a decent valet shop and get them to vax and clean them out
|
Luckily the seats aren't wet just the footwells. My mum has access to a carpet cleaner so may get that on the carpet.
While that is out though ill be sticking some sound deadening on the floor pan and seeing where I can add foam insulation to make the cabin less noisey. Driving my dads '11 focus today and it is silent :/
|
|
|
22-12-13, 02:09 PM
|
#24
|
Member
Join Date: Oct 2010
Location: Sunny Norfolk
Posts: 478
|
It doesn't matter if you work on it at midnight, leaving water in an engine aint clever eh!
get over to it, take the plugs out and turn it over, simple really
good luck
__________________
Monogram Typhoon 180 - 62k and in need of rear end repair
|
|
|
23-12-13, 08:21 PM
|
#25
|
Member
Join Date: Sep 2012
Location: Chester
Posts: 2,581
|
After working last night for 45 minutes only to find my spark plug Socket did not fit And buying a new one today, i spent two hours in the rain to get the plugs out.
I got absolutely soaked fighting with the rear bank coil packs! The plugs were easy once those were out!
The good news is it cranks on the starter!
It fired a load of water out of the rear bank drivers side cylinder only I think.
May have been some in the middle cylinder.
If I have ruled out the front three and the rear passengers side cylinder can I stick those plugs and coils back in to give a bit extra oomph to expel more water?
I'm happy it has rotated tbh!
But I guess I won't know if any other damage has been done till I get the plugs back on to fire it up.
Happier chap tonight though!
|
|
|
23-12-13, 08:27 PM
|
#26
|
Technical Expert R.I.P.
Join Date: Aug 2007
Posts: 9,239
|
Have you got a compression tester, if it cranks without making any horrible noises that's a good start.
__________________
------------------------------
------------------------------
__________________
It never got fast enough for me
Hunter S Thompson
R.I.P. Peter David Scott 18.07.59 to 21.11.16
Will be missed by us all but we will always remember you.
|
|
|
23-12-13, 08:30 PM
|
#27
|
Member
Join Date: Sep 2012
Location: Chester
Posts: 2,581
|
No I haven't and tbh don't know how to use one would I need all the plugs in apart from the one I'm testing? Also will it fit down the rear bank?
It cranked first turn of the key, I probably should have popped the injector fuse out as it stunk of petrol!
|
|
|
23-12-13, 08:51 PM
|
#28
|
Technical Expert R.I.P.
Join Date: Aug 2007
Posts: 9,239
|
No, the test is done with all plugs out, and the throttle fully open.
Getting to the rear plugs might be a challenge.
__________________
------------------------------
------------------------------
__________________
It never got fast enough for me
Hunter S Thompson
R.I.P. Peter David Scott 18.07.59 to 21.11.16
Will be missed by us all but we will always remember you.
|
|
|
23-12-13, 09:03 PM
|
#29
|
Member
Join Date: Jul 2011
Location: Nottingham
Posts: 707
|
You simply screw it in in place of each plug in turn, and crank the engine for about 5-10 seconds. Probably best to do it without any plugs in.
Your Haynes manual should tell you what the compression ought to be, but the main thing is as long as all the readings are healthy and reasonably close, then that's fine. Good idea to remove the fuel injection fuse as you say though.
__________________
BCingU,
En.
Mk2 MG ZS TD 115 with full 180 kit (and 2x Lotus Elan SE Turbos)
|
|
|
26-12-13, 04:19 PM
|
#30
|
technically an expertish
Join Date: Jun 2008
Location: Clydebank, Glasgow
Posts: 7,902
|
I wouldnt waste money on the tester, just stick the plugs back in now and see if it'll start, if its running poor should maybe look at it to confirm
__________________
------------------------------
------------------------------
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT. The time now is 07:21 AM.
|