|
|
07-07-13, 06:06 PM
|
#61
|
Technical Expert R.I.P.
Join Date: Aug 2007
Posts: 9,239
|
I think the M10 fine bolts may be a bit of a Japanese thing, it's commonly found on Jap bikes, I'd planned to measure the bolt length's needed and source some M10x1.25, you'd very likely get away with running an M10x1.5 tap through them, the only drawback with opening them to 10.5 and using a nut and bolt is the possibility of the holes wearing.
__________________
------------------------------
------------------------------
__________________
It never got fast enough for me
Hunter S Thompson
R.I.P. Peter David Scott 18.07.59 to 21.11.16
Will be missed by us all but we will always remember you.
|
|
|
07-07-13, 07:48 PM
|
#62
|
Site Owner
Join Date: Jul 2007
Location: Waterlooville, Hants
Posts: 24,097
|
Yes good point as it is under tension and may well 'ovalise' over time. No rush, I'll check the fixing supplier when back at work and see if they do any.
__________________
------------------------------
------------------------------
__________________
Some useful links:
|
|
|
07-07-13, 09:09 PM
|
#63
|
Member
Join Date: Feb 2008
Location: UK
Posts: 10,493
|
I recently bought a new jack to replace the one I've had for 26 years, it was the same make and 4p cheaper!
__________________
Former custodian of the legend that was FE54 - RIP
|
|
|
08-07-13, 08:57 AM
|
#64
|
Site Owner
Join Date: Jul 2007
Location: Waterlooville, Hants
Posts: 24,097
|
M10x1.25-50lg bolts sourced and bought, so no mods required. Will have a couple spare.
__________________
------------------------------
------------------------------
__________________
Some useful links:
|
|
|
08-07-13, 09:44 AM
|
#65
|
Technical Expert R.I.P.
Join Date: Aug 2007
Posts: 9,239
|
Quote:
Originally Posted by stamford
M10x1.25-50lg bolts sourced and bought, so no mods required. Will have a couple spare.
|
I'll buy the spares.
__________________
------------------------------
------------------------------
__________________
It never got fast enough for me
Hunter S Thompson
R.I.P. Peter David Scott 18.07.59 to 21.11.16
Will be missed by us all but we will always remember you.
|
|
|
08-07-13, 11:35 AM
|
#66
|
Site Owner
Join Date: Jul 2007
Location: Waterlooville, Hants
Posts: 24,097
|
Quote:
Originally Posted by petet16
I'll buy the spares.
|
__________________
------------------------------
------------------------------
__________________
Some useful links:
|
|
|
10-07-13, 07:13 AM
|
#67
|
Site Owner
Join Date: Jul 2007
Location: Waterlooville, Hants
Posts: 24,097
|
Last night cleaned the front calipers and carriers and started to paint them. Got a few more coats to do until they look decent enough.
Rear ARB polybushes ordered.
__________________
------------------------------
------------------------------
__________________
Some useful links:
|
|
|
10-07-13, 07:25 PM
|
#68
|
Site Owner
Join Date: Jul 2007
Location: Waterlooville, Hants
Posts: 24,097
|
ARB bolts arrived today-however they were screws not bolts. Supplier sending the correct ones tomorrow.
Gave the front calipers and carriers another coat of paint.
Started to paint the ARB and drop links.
__________________
------------------------------
------------------------------
__________________
Some useful links:
|
|
|
12-07-13, 09:21 PM
|
#69
|
Site Owner
Join Date: Jul 2007
Location: Waterlooville, Hants
Posts: 24,097
|
- More painting tonight. Front calipers another coat, plus some on the rears.
- Polybushes arrived, thanks Drew.
- Replacement ARB to LCA bolts arrived today.
Question regarding the HEL braided front hoses, as I have AVOs I seem to be lacking hose mounts. Has anyone fitted these? If so there is one plastic fitting on the hose itself, does this attach to the OE leg bracket somewhere. The AVOs do not have any brackets and the leg brackets are built into the OE hose assembly. Looks like I need to make a bracket up to support the hose and keep it safe.
__________________
------------------------------
------------------------------
__________________
Some useful links:
|
|
|
12-07-13, 09:37 PM
|
#70
|
Member
Join Date: Feb 2008
Location: UK
Posts: 10,493
|
I had to get hose mounts for my goodridge hoses, they were listed as civic items.
I can't find the page but here's their home page.
You'll need to order 2 as they come in singles.
http://goodridge.brakes-hoses-fittings.co.uk/
__________________
Former custodian of the legend that was FE54 - RIP
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT. The time now is 02:15 PM.
|