After a few goodies..

Chaz · 01-12-13, 09:23 PM

As above, on the look out for a few trick bits

Full leathers, alcantara or red monaco's to fit a saloon

Suitable lowering springs or coilovers for a ZS diesel, motobuild? civic coilovers maybe?

Lower rear brace, not the cheap motobuild ones you bolt into the turrets or whatever

Aftermarket saloon rear lights (black autoart's) or Rover 45 standard saloon rear lights with smoked reverse lense

Red leather steering wheel in good nick, may settle for silver?

Let me know what you've got!

Chaz · 02-12-13, 09:37 PM

Trawled eBay, cant find anything, why is stuff so hard to find for ZS's!

Dan1971 · 02-12-13, 09:53 PM

Quote:

Originally Posted by Chaz

Trawled eBay, cant find anything, why is stuff so hard to find for ZS's!

Coz when it comes up - we buy it !!!

Sure I saw some full leathers on there recently ....

Chaz · 03-12-13, 11:15 AM

Yeah there is some full black leather monacos for around £200, but they have wear on the drivers seat, can't be doing with that lol

Stephen · 03-12-13, 11:19 AM

Black sports leather is the seats to have. They ooze comfort and still support you. Im running a ZT with them fitted currently.

caled · 03-12-13, 12:28 PM

What, like these?

Mark S · 03-12-13, 01:05 PM

Its likely that most will have wear on the drivers seat.

You can either tint it, which is a few quid to do yourself, or get a new piece of leather sown in professionally, which is about 70quid. I wouldn't let a minor thing like a bit of wear put you off.

Malteser · 03-12-13, 03:26 PM

Or you can do what I did and get them custom made.

Chaz · 03-12-13, 04:28 PM

Quote:

Originally Posted by caled

What, like these?

Thats the ones, they are awesome!

The wear on the seat is quite bad, il try find the link again...

What can you do to cure it? Leather die or something?

Did see some Rover 45 black leathers on there but they dont look like they "hug" you as well as the ZS seats, id imagine you slide about all over lol

talkingcars · 03-12-13, 06:50 PM

Quote:

Originally Posted by Chaz

Lower rear brace, not the cheap motobuild ones you bolt into the turrets or whatever

Do you mean the one that goes under the car?

And if you don't bolt them on how do you fit them? Weld?

Quote:

Originally Posted by Chaz

Aftermarket saloon rear lights (black autoart's) or Rover 45 standard saloon rear lights with smoked reverse lense

I did mine myself using an e-tech light tinting set - gone through 4 MOTs.