LHD MG ZS 180 MK2 has arrived

[Jason04r]

What would be the reason for my passenger side window slipping out the rubbers when winding them up ?

If i push the glass then it moves and i can hold it in the correct place until its closed

[petet16]

Possibly the mechanism has come loose from the door, but more likely that the rubber channels that the window slides in need lubing with some silicone type grease.

[talkingcars]

Originally Posted by petet16

Possibly the mechanism has come loose from the door, but more likely that the rubber channels that the window slides in need lubing with some silicone type grease.

In my experience the mechanism comes loose as it fights the unlubed channels, pop the door card off and check the 3 bolts that hold it in place.

[Jason04r]

Originally Posted by talkingcars

In my experience the mechanism comes loose as it fights the unlubed channels, pop the door card off and check the 3 bolts that hold it in place.

Will do , I have some silicon grease so I'll do all four this weekend.

Shall update

[Jason04r]

I'm at work and want to order new wiper blades... Which size is for the ZS?

Thanks

[Djules]

45 and 50 centimeters IIRC (so 18 and 20 inches I reckon)

[Skillen]

I go 22/20 for bigger swept area with no problems

[Jason04r]

Great stuff , thanks..

Whats the best product to use to stick back the rear wheel arch trim , its hanging loose from the top.

[petet16]

Sikaflex 221 or Tigerseal work ok.

[Jason04r]

Right so did some work on the car but the tube i said was the washer bottle is actually the power steering tube.

Its currently running under the drive shaft , wouldn't know the correct place it should run