Breaking - Red Mk1 V6 Hatch

[Craig-ZS180]

Originally Posted by Dan1971

Yep... But l need a wheel of some sort to move around until the chassis goes

Ah yeah, didnt think about that one .
Only want one for the horn connector and to cut the back off to make a spacer up as dont want to ruin mine so can change back as and when needed.

[Dan1971]

Originally Posted by Craig-ZS180

Ah yeah, didnt think about that one .
Only want one for the horn connector and to cut the back off to make a spacer up as dont want to ruin mine so can change back as and when needed.

Come up and do it here if you like. So long as I have a wheel to move the car, you can help yourself to the wiring for the horn. Wheels go for about a tenner anyway - and you can have the 45 wheel for that.

[M17TT180]

Originally Posted by Dan1971

Come up and do it here if you like. So long as I have a wheel to move the car, you can help yourself to the wiring for the horn. Wheels go for about a tenner anyway - and you can have the 45 wheel for that.

Dan is your wheel smaller on the mk2 than the mk1?

[Dan1971]

Originally Posted by M17TT180

Dan is your wheel smaller on the mk2 than the mk1?

Just compared and the diameter apppears the same, but the Mk2 wheel feels thicker.

[Craig-ZS180]

Originally Posted by Dan1971

Come up and do it here if you like. So long as I have a wheel to move the car, you can help yourself to the wiring for the horn. Wheels go for about a tenner anyway - and you can have the 45 wheel for that.

Cheers for the offer of that Dan, I still have the F wheel to try but that's why was going to cut up the back spline spacer of a "spare" zs wheel to save my oe one. If however after trying it and still no joy I think I would be saying I'd have the 45 wheel as at least then its a straight swap over and it will work on my normal coupler and bits.
If I do come to you at least it would mean the wheel would remain at yours and go straight back on I suppose. When over the near future would fit in for something like that with you mate?

[Dan1971]

Originally Posted by Craig-ZS180

Cheers for the offer of that Dan, I still have the F wheel to try but that's why was going to cut up the back spline spacer of a "spare" zs wheel to save my oe one. If however after trying it and still no joy I think I would be saying I'd have the 45 wheel as at least then its a straight swap over and it will work on my normal coupler and bits.
If I do come to you at least it would mean the wheel would remain at yours and go straight back on I suppose. When over the near future would fit in for something like that with you mate?

Any evening you want really pal, or at the weekend.

[Craig-ZS180]

Originally Posted by Dan1971

Any evening you want really pal, or at the weekend.

That's cool mate, cheers. I shall speak with the boss to see what fits in best for her and the kids and will be in touch to organise popping over then mate

[Dan1971]

Tomorrow the engine and gearbox is coming out, and the doors and brakes etc getting stripped off.

Anyone not doing anything tomorrow is welcome to come round and help .... I'll confirm times with my mate later and post up.

Engine and gearbox should be on a pallet and ready to go so I'll take offers on them and any other bits you may want, but the chassis is going next week for sure as the front's getting done the week after.

Cheers

[M17TT180]

Originally Posted by Dan1971

Tomorrow the engine and gearbox is coming out, and the doors and brakes etc getting stripped off.

Anyone not doing anything tomorrow is welcome to come round and help .... I'll confirm times with my mate later and post up.

Engine and gearbox should be on a pallet and ready to go so I'll take offers on them and any other bits you may want, but the chassis is going next week for sure as the front's getting done the week after.

Cheers

I'll pop over mate pick that vis kit up. Just lemme know a time.