theMGZS.co.uk   Navigation

AboutNews Flyers Forum Events Home

Home
Go Back   theMGZS.co.uk :: MG ZS forum > Technical Area > Build Projects

Reply
 
Thread Tools Display Modes
Old 27-04-20, 07:04 PM   #291
Dan1971
Site Ambassador
 
Dan1971's Avatar
 
Join Date: Feb 2008
Location: Scottish borders
Posts: 11,532
Dan1971 has much to be proud ofDan1971 has much to be proud ofDan1971 has much to be proud ofDan1971 has much to be proud ofDan1971 has much to be proud ofDan1971 has much to be proud ofDan1971 has much to be proud ofDan1971 has much to be proud ofDan1971 has much to be proud ofDan1971 has much to be proud ofDan1971 has much to be proud of
Good man...
__________________
------------------------------
theMGZS.co.uk Supporter
------------------------------
__________________
------------------------------
theMGZS.co.uk Supporter
------------------------------
Dan1971 is offline   Reply With Quote
Old 28-04-20, 09:16 AM   #292
p_b82
Site Supporter
 
p_b82's Avatar
 
Join Date: Sep 2008
Location: The Shire
Posts: 2,857
p_b82 is a jewel in the roughp_b82 is a jewel in the roughp_b82 is a jewel in the rough
Sounds like you've been making good use of your time!
__________________
------------------------------
theMGZS.co.uk Supporter
------------------------------
__________________
Mods Fitted
Pipercross Filter; Full 2.5" 'Wingy' exhaust; Donny Custom Turbo outlet pipe; Custom injectors;
Uprated gearbox bearings; Helix Clutch; Quaife ATB; Upgraded clutch Hydraulics; FMIC; Ported Head; ARP headstuds; Leda coilovers; 'Brembodge' 326mm disks/DS2500 pads
Dieselpowered
Fitting Custom Hybrid Turbo (1856GTBv) & controller; Remap, swirlpot, lift pump
AMW Motorsports
Custom exhaust manifold & downpipe
p_b82 is offline   Reply With Quote
Old 28-04-20, 11:47 AM   #293
stamford
Site Owner
 
stamford's Avatar
 
Join Date: Jul 2007
Location: Waterlooville, Hants
Posts: 24,094
stamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud of
Might as well. I have jobs for rainy days so I’m doing dry day jobs for now. That means MG work! Well it does to me.
__________________
------------------------------
theMGZS.co.uk Admin
------------------------------
__________________
Some useful links:
stamford is online now   Reply With Quote
Old 29-04-20, 09:16 AM   #294
p_b82
Site Supporter
 
p_b82's Avatar
 
Join Date: Sep 2008
Location: The Shire
Posts: 2,857
p_b82 is a jewel in the roughp_b82 is a jewel in the roughp_b82 is a jewel in the rough
Well this week is plenty of rainy day jobs ahead I think!

But glad you're making progress again
__________________
------------------------------
theMGZS.co.uk Supporter
------------------------------
__________________
Mods Fitted
Pipercross Filter; Full 2.5" 'Wingy' exhaust; Donny Custom Turbo outlet pipe; Custom injectors;
Uprated gearbox bearings; Helix Clutch; Quaife ATB; Upgraded clutch Hydraulics; FMIC; Ported Head; ARP headstuds; Leda coilovers; 'Brembodge' 326mm disks/DS2500 pads
Dieselpowered
Fitting Custom Hybrid Turbo (1856GTBv) & controller; Remap, swirlpot, lift pump
AMW Motorsports
Custom exhaust manifold & downpipe
p_b82 is offline   Reply With Quote
Old 29-04-20, 12:20 PM   #295
stamford
Site Owner
 
stamford's Avatar
 
Join Date: Jul 2007
Location: Waterlooville, Hants
Posts: 24,094
stamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud of
Indeed. As I have partially stripped the top end I have cleaning jobs to do in the garage of all the parts.

Well, shopping list drafted to refurbish the engine, sitting at just under £300! Think I’ll wait until after my birthday, I did request DMGRS vouchers, got £40 from xmas still to use! Takes the sting out of it a little. Got my furloughed wave to look forward to yet!
__________________
------------------------------
theMGZS.co.uk Admin
------------------------------
__________________
Some useful links:
stamford is online now   Reply With Quote
Old 14-05-20, 07:24 PM   #296
stamford
Site Owner
 
stamford's Avatar
 
Join Date: Jul 2007
Location: Waterlooville, Hants
Posts: 24,094
stamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud of
Order placed with DMGRS and weighed in a fair bit. So during furlough I aim to
  • Fit Piper 270 cams and oil seals.
  • Full cam belt service, water pump and tensioner.
  • Set of spark plugs.
  • Fuel filter.
  • Oil service.
  • All new gaskets to cam covers, inlet manifolds.
  • Replace the thermostat housing and sensor whilst it’s accessible, was done several years ago but not worth risking it.
  • Total clean of all brackets, covers and might even try to polish the cam covers.
__________________
------------------------------
theMGZS.co.uk Admin
------------------------------
__________________
Some useful links:
stamford is online now   Reply With Quote
Old 15-05-20, 06:57 PM   #297
peterzs
promoted bloke!
 
peterzs's Avatar
 
Join Date: May 2008
Location: bournemouth
Posts: 16,793
peterzs is a splendid one to beholdpeterzs is a splendid one to beholdpeterzs is a splendid one to beholdpeterzs is a splendid one to beholdpeterzs is a splendid one to beholdpeterzs is a splendid one to beholdpeterzs is a splendid one to beholdpeterzs is a splendid one to beholdpeterzs is a splendid one to behold
Smile

sounds like a plan, hope it all goes well.

Clutch OK.

__________________
------------------------------
theMGZS.co.uk Admin
------------------------------
__________________
peterzs is offline   Reply With Quote
Old 17-05-20, 11:26 PM   #298
Dan1971
Site Ambassador
 
Dan1971's Avatar
 
Join Date: Feb 2008
Location: Scottish borders
Posts: 11,532
Dan1971 has much to be proud ofDan1971 has much to be proud ofDan1971 has much to be proud ofDan1971 has much to be proud ofDan1971 has much to be proud ofDan1971 has much to be proud ofDan1971 has much to be proud ofDan1971 has much to be proud ofDan1971 has much to be proud ofDan1971 has much to be proud ofDan1971 has much to be proud of
Gonna be a busy boy with all that....

Hope it goes well...
__________________
------------------------------
theMGZS.co.uk Supporter
------------------------------
__________________
------------------------------
theMGZS.co.uk Supporter
------------------------------
Dan1971 is offline   Reply With Quote
Old 08-07-20, 08:39 PM   #299
stamford
Site Owner
 
stamford's Avatar
 
Join Date: Jul 2007
Location: Waterlooville, Hants
Posts: 24,094
stamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud ofstamford has much to be proud of
Update:
  • New thermostat assembly fitted.
  • New water pump fitted.
  • X6 sparks plugs fitted.
  • Piper 270 cams fitted (with issues).

So, the Piper cams. All fitted and torqued as per the book. Went to fit the main cam belt then the primary locking tools. I can’t fit the tool to the front bank. After much checking and questioning my sanity it appears I have a duff camshaft in such that they have machined the sprocket notch in the wrong place, about 90 degrees out. I offered my original camshaft up against the new one and it is different. So I have some thinking to do to get around this.

One thing I have learned from this strip down, the cam covers mesh filters are located where the breather push fittings are, one fitting is a large hole, the other looks like a solid wall, no it is not! There is a diameter 1.5mm hole there! Mine were blocked, couldn’t see it. Could cause an issue with crankcase pressures apparently.
__________________
------------------------------
theMGZS.co.uk Admin
------------------------------
__________________
Some useful links:
stamford is online now   Reply With Quote
Old 10-07-20, 04:41 PM   #300
ZS
IT Administrator
 
ZS's Avatar
 
Join Date: Oct 2007
Location: Winchester-ish
Posts: 5,092
ZS is a glorious beacon of lightZS is a glorious beacon of lightZS is a glorious beacon of lightZS is a glorious beacon of lightZS is a glorious beacon of lightZS is a glorious beacon of light
Quote:
Originally Posted by stamford View Post
Update:
  • New thermostat assembly fitted.
  • New water pump fitted.
  • X6 sparks plugs fitted.
  • Piper 270 cams fitted (with issues).

So, the Piper cams. All fitted and torqued as per the book. Went to fit the main cam belt then the primary locking tools. I can’t fit the tool to the front bank. After much checking and questioning my sanity it appears I have a duff camshaft in such that they have machined the sprocket notch in the wrong place, about 90 degrees out. I offered my original camshaft up against the new one and it is different. So I have some thinking to do to get around this.

One thing I have learned from this strip down, the cam covers mesh filters are located where the breather push fittings are, one fitting is a large hole, the other looks like a solid wall, no it is not! There is a diameter 1.5mm hole there! Mine were blocked, couldn’t see it. Could cause an issue with crankcase pressures apparently.
Have you got an idea of location (picture or whatnot) of those breather holes? When I have got T16 on the road, its on to FE54 to ger her back running again!
__________________
------------------------------
theMGZS.co.uk Admin
------------------------------
__________________
zs@themgzs.co.uk

I love it when people call me at 3 AM. "Hey, you asleep?" "No, I'm skydiving."

http://www.bexairbrushing.co.uk
ZS is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 08:00 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ? 2010 theMGZS.co.uk