How to Guides

lukiep160 · 12-07-07, 10:41 PM

Is there anyone that requires any specific how to guides, please post here with your requests and i'll do my best to create one for you and post it in the how to section.
I will start to make standard service ones over the coming week or so.

hob · 12-07-07, 10:54 PM

Head gasket one I guess would be very useful for the k series boys

12-07-07, 11:10 PM

not me fingers crossed

stamford · 13-07-07, 07:11 AM

I want to lay an extension on my concrete driveway.....................

okay i'll get me coat............

Robstar · 13-07-07, 09:34 AM

Well im just getting into all this engineering milakybut it would be great if you could post one to install a enclosed induction kit.

Thanks Matey

TurboZed · 13-07-07, 10:58 AM

Vis valve repair and fitting an oil catch tank probably would be good for the 180 guys. Also a cambelt change on an L series would also be usefull for us tractor drivers

Jim

13-07-07, 11:00 AM

how about changing disks and pads on the breaks need to move my ebc ones to the 180 when i get it...

lukiep160 · 13-07-07, 05:30 PM

Quote:

Originally Posted by chriszs120

how about changing disks and pads on the breaks need to move my ebc ones to the 180 when i get it...

That one is on the way, i'm going to take some proper photos when i next change a set of pads

TurboZed · 13-07-07, 07:17 PM

But dont 180's have bigger disks than 120's? or have you previously upgraded?
Jim

lukiep160 · 13-07-07, 08:19 PM

Quote:

Originally Posted by TurboZed

But dont 180's have bigger disks than 120's? or have you previously upgraded?
Jim

they are indeed bigger by 20mm but changing disc and pads is the same principle on both