test for the clever amongst you all

[ZSZRANDRF900]

right, first person who can figure a way to get these fitted to my 180, gets a free pair for themself too.

http://www.ebay.co.uk/itm/MG-TF-MGF-...item19ed7a75f7

[Skillen]

Honestly it'll be easier and by all accounts more effective to fit a pair of pug 406 coupe v6 brembos.
You'll need to get the discs custom drilled as the TF uses a different PCD and then you'll need to get some adaptor platesade up id guess.

All of these things can be obtained more easily and it has been done a number of times by others.

Don't get me wrong it'll be cool. But brembos are cooler and bigger

[talkingcars]

You wont get those discs drilled for the correct PDC as there are no discs included.

[Skillen]

Originally Posted by talkingcars

You wont get those discs drilled for the correct PDC as there are no discs included.

I honestly only read the ap callipers bit and then came back lol

They're probably available elsewhere.

[ZSZRANDRF900]

hmm sounds like a total hassle

[Skillen]

Do a search for Brembodge.
You'll find all the info you'll need

[tallgeese]

That's easy as you didn't say where u wanted them fitting, I'll post you some
string and boom a replacement for the fuzzy dice

[ZS]

It has been done a few times, but breaking isn't as good as oe, due to smaller cylinders...

[sneekyparrot]

only good place to use those would be for the rear :-)

far better front options out there but cheapest good setup is the brembodge. There are a few guys that can supply you better drawings for the adaptors that dont need spacing with washers and martin at reylands can supply better qual discs.

P.

[ZSZRANDRF900]

Well i think i may have a way forward, the fiat coupe turbo has 300 dia discs, with 4 x 100CPD studs. 28 mm thick so i need to measure if they will fit between the pads