caliper drawings needed

ZSZRANDRF900 · 03-07-14, 01:27 PM

you would hope that working at Longbridge the guys there would have the drawings for the old parts fitted.... not so sadly.

Does anyone have the draings of dimensions of the factory fit front calipers, caliper carrier, and disc for the 180 zs?

easytime · 03-07-14, 01:58 PM

Hang on.... ( gets crayon out) :-)

ZSZRANDRF900 · 03-07-14, 02:44 PM

i think they used to be on a wax rubbing..... or was that on the adult channel

Jay-ZS+ · 03-07-14, 02:47 PM

Was going to say didn't they use a blackboard back then at longbridge during the development.

But serious think you would be very luck to find drawings probably better off removing the wheel and getting the ruler out

petet16 · 03-07-14, 02:49 PM

www.brakeparts.co.uk has good information on disc sizes and dimensions, they used to show the same for the calipers but the site has been updated since I last visited and now shows calipers as unavailable, I cross checked with zr160 calipers and they show the wrong calipers, so only some of the info you need is shown

petet16 · 03-07-14, 02:51 PM

They would have been carved on a stone tablet originally I think

ZSZRANDRF900 · 03-07-14, 04:07 PM

will check online at home pete, thanks