Reyland Zs Rebuild / Update

petet16 · 20-10-14, 08:05 AM

Good progress, was the rad a custom build, or is it one of nissens standard range of rads, as 180 rads are nla and likely to remain so that could be a viable alternative.

sneekyparrot · 20-10-14, 11:13 AM

Quote:

Originally Posted by petet16

Good progress, was the rad a custom build, or is it one of nissens standard range of rads, as 180 rads are nla and likely to remain so that could be a viable alternative.

Can't remember 100% if it was the 200 or 180sx alloy rad but I had to check out a few suppliers as they were all slightly different sizes. Unfortunately it's not a straight fit as the lower rail needs chopping about to get it.
Just rad cap and no fittings to tie in original expansion vessel but nothing to huge.
Just nowt out there that will slot in place, as I am finding with everything hence me having to make most bit up myself.

petet16 · 20-10-14, 11:32 AM

Cheers for the info re rad.

sneekyparrot · 24-10-14, 02:57 PM

Quote:

Originally Posted by petet16

Cheers for the info re rad.

ImageUploadedByTapatalk1414162595.032704.jpg
Better pic Peter, show the lower rail chopped about to get rad in.

petet16 · 24-10-14, 03:22 PM

Cheers, a bit of work needed to make it fit then.

sneekyparrot · 25-10-14, 10:43 AM

Quote:

Originally Posted by petet16

Cheers, a bit of work needed to make it fit then.

yep, same with most things for ZS's! not alot of ppls doing aftermarket parts for them anymore.

thats why i end up doing most work myself. Just had the gear turn up to make my own bushes.

almost at point of giving up with waiting for ppls to make bodykits / doors etc so started looking into how i can make my own

may even put it back on road as a mk1 to start with so i can at least drive it

Mark S · 25-10-14, 04:40 PM

Quote:

Originally Posted by sneekyparrot

yep, same with most things for ZS's! not alot of ppls doing aftermarket parts for them anymore.

thats why i end up doing most work myself. Just had the gear turn up to make my own bushes.

almost at point of giving up with waiting for ppls to make bodykits / doors etc so started looking into how i can make my own

may even put it back on road as a mk1 to start with so i can at least drive it

I thought Eddie Farrow had found someone to do the btc kits?