Heated seat set up

lukenobrains · 27-10-13, 04:55 PM

Want a heated seat set up for my Mk2 ZS

Both switches
Relays
Seat inserts

I think thats all I need......

I dont mind buying it all in one or in stages...
thanks
Luke

KevG · 28-10-13, 08:09 PM

Part Numbers you require:

YUG103180PMP - DASHBOARD SWITCH
YUG103200PMP - DASHBOARD SWITCH
YWB000440 - RELAY FOR FUSEBOX x2
HGK000100 - HEAT PAD SQUAB x 2
HGL000100 - HEAT PAD CUSHION x 2

Check Rimmer Bros for availability and prices

Radiomike · 29-10-13, 01:14 PM

Rimmer showing no stock of HGL000100 but you could try here: http://www.ekmpowershop28.com/ekmps/...00-24510-p.asp

Dave · 29-10-13, 07:14 PM

Keep an eye out for anybody breaking a R45 or ZS with heated seats.

I bought a pair of front seats with the heater elements, one of the seat frames was bent, so got them far cheaper than new ones, even with having to collect them.

I just stripped the seats down, and re-stuck them with carpet tape onto my ZS seats.

With stripping 4 front seats, removing and refitting the seats into the car, fitting the elements etc, took me around 3 hours in total.

Cheers
Dave

redzed · 29-10-13, 07:43 PM

Are not zt seats more common? they come heated on a lot of models, and are the same seats. All you have to do is cut of a small lug on the inside on one of the runners to make it fit a zs and you could get one with the same trim as yours and save swapping bits about

caled · 29-10-13, 08:15 PM

Whats the difference between HGL000100, which is listed above and is NLA, and HGL000080, which is in stock?

link

petet16 · 29-10-13, 08:56 PM

HGL000080 is also £10 each, if the picture is of the actual item I think it would fit fine, I'm not sure if all the heater pads had the same plugs though, so it may need the connectors cutting off and hard wiring to join the wires.