mk2 zs180, turn over but no spark

[petet16]

I've never been sure if the ring is coded to the fobs/bcu/ecu or not, when I changed them I did the whole lot just to be on the safe side, have you tried putting the original ring back.

[ZS]

how much fuel is in the tank?

[Ritchy]

I get what your saying about it turning over so may rule out the earth. The read sensor shouldnt need coded in. And if th imobiliser was kicking in i dont think it would turn over

[ZS]

Originally Posted by Ritchy

I get what your saying about it turning over so may rule out the earth. The read sensor shouldnt need coded in. And if th imobiliser was kicking in i dont think it would turn over

Both of my immobilisers let the engine turn over but don't fire...

[Mark S]

this may be a pektron quirk - i don't know...

if you put ignition on when immobilised, it beeps like mad and does not even allow the engine to turn, I often found though that if you press the unlock button with ignition still on and try to start it it will turn over and not start (immobilised the spark), I would have to turn ignition fully off for it to start properly - almost as though it is immobilised in 2 ways - starter and spark.

may not be related at all, but it is making me think its an immobiliser issue?

[Mark S]

was blown fuse.

[petet16]

Glad it's sorted without too much £££ being spent

[peterzs]

I'm now going to say every time......................... Have you checked the relay in the passenger footwell for water?????

Dont know what it all means but has caused a bit of a prob in the past!!!!

Just wondering why the fuse would blow.

[petet16]

Originally Posted by peterzs

I'm now going to say every time......................... Have you checked the relay in the passenger footwell for water?????

Dont know what it all means but has caused a bit of a prob in the past!!!!

Just wondering why the fuse would blow.

Only for pre 2003 cars Pete

[peterzs]

Cheers