Mg zs v6

Bakermgzs · 17-07-20, 09:31 PM

To be honest I swapped it for my run about zs rio red to, but unfortunately no it run like absolutely bag of poo the dude who had it know nufink about mg it wouldn't start when it got there would only start thro bumping it. Absolutely crap when needed fuel half way home. Was blowing lods of oil out of the breather pipe when under boost. To put it straight it was ragged so hard by someone. But I built the supercharged zs and am a mechanic. So rebuilt engine and sprayed block blue engine is pretty much built up now with all accessories. So not long she be running. As for pol it been on every year so far part from this year do to circumstances

gAZ · 25-08-20, 07:48 PM

Quote:

Originally Posted by Bakermgzs

To be honest I swapped it for my run about zs rio red to, but unfortunately no it run like absolutely bag of poo the dude who had it know nufink about mg it wouldn't start when it got there would only start thro bumping it. Absolutely crap when needed fuel half way home. Was blowing lods of oil out of the breather pipe when under boost. To put it straight it was ragged so hard by someone. But I built the supercharged zs and am a mechanic. So rebuilt engine and sprayed block blue engine is pretty much built up now with all accessories. So not long she be running. As for pol it been on every year so far part from this year do to circumstances

Hi mate, what kind of intercooler is that on the ZS T16?

Bakermgzs · 05-11-20, 05:53 PM

Hi all right I'm finally there zs t16 is pretty much rebuilt on engine side of things, I've still kept everything pretty much standard at moment. After rebuilding it and starting it it just kept dieing. After alot pissing about turned out to be maf sensor in the ecu I opened it up and somone who had it before had tried soldering lods wires all over the circuit. After sourcing another ecu with same code, I know the chances started first time after getting mot done and fuw miles run brilliantly now soo happy. Iv got Gfb boost controller and pressure regulator and over bits but not properd to fit anything without afr gauge. All in good time