breaking rover 414 1998

[SimonMGZS]

Originally Posted by KevG

How much for the the A pillar interior trims x 2?

i am not sure how to get these off but they will be £10 plus postage.

[SimonMGZS]

Originally Posted by Boot Hill Bandit

You are welcome to rear seats Shafz.....I doubt the guys will want rear seats only to upgrade to comfy fronts if they are local.

Jim

jim i am in colchester in essex

[SimonMGZS]

Originally Posted by Craig 180

is the slave cylinder in decent nick?

the slave cylinder seemed to be ok but as i have not been able to drive the car because of major head gasket failure.

it did seem ok when i had to put in first gear and crank the engine over to get it on the trailer.

[arwilson80]

I know it's a small part, but seeing as i broke the spring that holds in the passenger side headlight bulb.... what are the chances of having that?

Assuming it's easy to get out of course and the same as the ZS. If it's not then don't go to any hassle.

[KevG]

Originally Posted by arwilson80

I know it's a small part, but seeing as i broke the spring that holds in the passenger side headlight bulb.... what are the chances of having that?

You been playing at auto electrician with your sausage fingers again Alan?

[arwilson80]

Just trying to change the bulb without loosening the battery and it went 'ting'...

[Maxxed_Ross]

it's easy done

[SimonMGZS]

Originally Posted by arwilson80

I know it's a small part, but seeing as i broke the spring that holds in the passenger side headlight bulb.... what are the chances of having that?

Assuming it's easy to get out of course and the same as the ZS. If it's not then don't go to any hassle.

sorry mate i need those for my own 414 as they have both broken by a previous owner as the bulbs are taped in at the mo

[Maxxed_Ross]

any update on the other parts buddy?

was the heater resistor any good?