Accentuating the V6

[maxtherotti]

Originally Posted by R8NMG

I have a Janspeed backbox and when I changed my centre section from OE to Janspeed it made a noticeable difference to the sound. All very positive.

+1 for mine too
started all stock
then added x power rear box
then added x power centre section
then removed x power rear box and fitted blue flame duplex rear section now sounds ok to me

Rob

[sambomonkee]

Originally Posted by Craig-ZS180

Right, well here it goes with the list. Main thing I was telling myself was I needed to keep the main hoses 76mm internal diameter and the breather hose 19mm internal.

With all the extra bits of pipe work along side of the kit you may think why but that when you only use 2 or 3 pipes as a max but when you compare the cost if the kit against buying more of the 90 degree pipes seperately it actually becomes cheaper this way.
Again its only a guide as its what I used.
The silicone pipes again which ever colour you decide to go for can be selected before the buy now option and I believe three of the bits are from the same supplier so would get in one hit.

Hope its of some help to you.


http://www.ebay.co.uk/itm/1608145456...84.m1423.l2649

x 1 of the above

http://www.ebay.co.uk/itm/3106673401...84.m1423.l2649

X 1 of the above

http://www.ebay.co.uk/itm/2708657138...84.m1423.l2649

X 1 of the above

http://www.ebay.co.uk/itm/2906404308...84.m1423.l2649

x 4 of the above


http://www.ebay.co.uk/itm/2907422989...84.m1423.l2649

x 1 of the above

Then you would just need to choose a filter you want for it along with some larger hose clips or equivalent. My most expensive part as went as big as possible on the itg one that would fit. Filter as with all this kit is just a guide but I can say im very pleased with how it works for me.

then you should have something that looks like my setup.

Wow brilliant I owe you one, best get ordering

[Skillen]

Literally just finished putting an xpower janspeed backbox on my hatch.
I went from standard to stainless decat and centre section. Sounded good and gave a good little kick.
Then I added an ITG Maxogen. Sounds brilliant nice induction roar and awesome sucking noise lol! and the engine seemed to love it!

And now I've added this! Haven't even started it since fitting so will have to wait and see how it sounds!

[Craig-ZS180]

Originally Posted by sambomonkee

Wow brilliant I owe you one, best get ordering

No worries mate, hopefully if you do go ahead with this route you'll be very pleased with the outcome.

[Skillen]

http://youtu.be/JFM3jtoujUk

That's its first start with the new janspeed
Dunno what that other background noise is though lol

[Craig-ZS180]

I like the sound of that Skillen, it is quite a different sound from the Janspeed/Xpower setup compared to my Piper I have fitted. Quite a different tone from them after hearing your exhaust on here.

This was the sound of mine with the induction and a stainless rear box on its own, before full piper stainless cat back and the decat being fitted.

Sorry about the video being removed but everytime I went to view it, it was freezing and cutting out so wasn't sure if was the clip or something else.
I shall try to load it again tomorrow using YouTube once crossed it over and see if it works any better. Dont know if anyone else watched it and it worked but wasn't on my computer or phone