Clips!!!

[Ziggy ZS]

Hi guys,
Hope your all good and dint get too wet today.💦💦☔☔
I need to ask you all another question, so here goes.....

I've bought MGZS side skirts but I've not got any clips, do any of you know where I can get some which are pretty cheap please ,
Ta very muchly x

[petet16]

mk2 skirts ?

[ade-5]

I wouldn't mind knowing either, my skirts on my mark 2 look like there hanging on by nothing so hopefully some new clips would sort them,?

[petet16]

For the mk2 kit http://www.rimmerbros.co.uk/Item--i-GRID003388

[Ziggy ZS]

Hi,
Tried Rimmer brothers, you need 16 clips for each side, they work out around£66, which I can't afford at the mo,
Yes mark 2 (I think) I'm sure Bob will correct me if I'm wrong.
(Thought I'd better say, I'm female, hence why I put xxxx )

Thanks for your help

[petet16]

£66 ouch, just for clips.

[WalkerDnB]

Originally Posted by petet16

£66 ouch, just for clips.

sound like a job for a few screws and a load of tiger seal to me.

[petet16]

These could work out a whole lot cheaper if they are the right ones
http://www.ebay.co.uk/itm/Mgzs-Side-...item20d1bd1725

[peterzs]

I had a problem with the front of my off side one, I used a clear sealer and some G clamps to stick it back together.

There is a proper adhesive for sticking the body kit bits, that doesnt cause rusting.

Reading your first post see they are new sills, not just ones falling off.

Those Pete found look like the ones that go into the side of the body work, there are also screw type ones that go underneath the floor and screw upwards.

You going to Halfway House on Sunday, Ziggy???

[petet16]

Here's some more http://www.ebay.co.uk/itm/HONDA-ACCO...d=469475647820