adjust it up till the revs are affected then knock its back 2 quater turns and then blip the throttle n check its settling okay, had 15 rovers this week alone with slack cables n mad e agood difference to all them, if you look at the throttle body youll see the cable, and a plastic nut clipped into the bracket there, feel the cable n it will probably have a lot of slack in it, pop the nut out and wind the majority of the slack out the cable, clip back in, then start turnoing it a quater turn at a time till the revs are affected, then knock back the way say usually 2 or 3 quater turns and blip the throttle and make sure it settles properly
__________________
------------------------------
------------------------------
|