theMGZS.co.uk   Navigation

AboutNews Flyers Forum Events Home

Home
Go Back   theMGZS.co.uk :: MG ZS forum > Technical Area > Build Projects > Smokey's site track day car

Reply
 
Thread Tools Display Modes
Old 14-07-12, 11:16 AM   #1
Smokey
The Alan Gow of OBTCC
 
Smokey's Avatar
 
Join Date: Aug 2007
Location: Dundee
Posts: 8,557
Smokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to behold
Front brake concern

Ok, so I was cleaning and regreasing the brakes today. Reason for this was 2 fold:
1. I was interested to know why the o/s/f wheel had loooads of brake dust on the alloy in a pattern that was different to the other side....
2. I felt a slight tracking or braking issue on the way to Knockhill last time and wanted to narrow it down to possibly just tracking.

I was thinking maybe the front slider pin was jamming (I know it's usually the back) but figured it was a good time to check and clean them all.

Rears were spot on. These are the ones I had issues with when I got the car and had to hammer the feckers out!

Fronts too seemed fine except one slider pin.

Now I wish I'd taken a photo but it was raining... out of the 8 sliders, 1 of them (o/s/f) is different in that instead of just the metal shaft that goes in to the caliper....it has an indent in which a rubber bit sits. This makes the pin a lot more difficult to pull out (like suction or something). I have now removed it and the slider is much smoother.

Is this maybe a pin from another car?

Should I put the rubber bit back on?

Has anyone else seen this?

Will Batman escape once more from the clutches of the Joker?

Tune in on Monday to find out if the car explodes due to this bit or rubber being removed!!
__________________
------------------------------
theMGZS.co.uk Supporter
------------------------------
__________________
------------------------------
theMGZS.co.uk Supporter
------------------------------
__________________
------------------------------
theMGZS.co.uk Supporter
------------------------------
__________________


2009 Forza 2 theMGZS.co.uk OBTCC 2nd Place Runner-up
2009/2010 Forza 3 theMGZS.co.uk OBTCC/Clio Cup 4th Place
2010 Forza 3 theMGZS.co.uk OBTCC/F500 Cup 2nd Place Runner-up
2011 Forza 3 theMGZS.co.uk OBTCC/Driver's Championship 3rd Place
2012 Forza 4 theMGZS.co.uk OBTCC/Driver's Championship 1st Place Winner
2012/2013 Forza 4 theMGZS.co.uk OBTCC/DTM Championship 3rd Place
Smokey is offline   Reply With Quote
Old 14-07-12, 11:21 AM   #2
peterzs
promoted bloke!
 
peterzs's Avatar
 
Join Date: May 2008
Location: bournemouth
Posts: 16,793
peterzs is a splendid one to beholdpeterzs is a splendid one to beholdpeterzs is a splendid one to beholdpeterzs is a splendid one to beholdpeterzs is a splendid one to beholdpeterzs is a splendid one to beholdpeterzs is a splendid one to beholdpeterzs is a splendid one to beholdpeterzs is a splendid one to behold
What grease you using, have been reading that copper grease can loose its slippy, sliding action, due to drying out.
__________________
------------------------------
theMGZS.co.uk Admin
------------------------------
__________________
peterzs is offline   Reply With Quote
Old 14-07-12, 11:23 AM   #3
Ritchy
technically an expertish
 
Ritchy's Avatar
 
Join Date: Jun 2008
Location: Clydebank, Glasgow
Posts: 7,902
Ritchy is a name known to allRitchy is a name known to allRitchy is a name known to allRitchy is a name known to allRitchy is a name known to allRitchy is a name known to allRitchy is a name known to all
probably off another car, mazda rear ones have the rubber washer on the slider, all itll be is a dampner to stop knocking.
__________________
------------------------------
theMGZS.co.uk Admin
------------------------------
__________________
Top Gear Transmissions Glasgow
Ritchy is offline   Reply With Quote
Old 14-07-12, 11:36 AM   #4
petet16
Technical Expert R.I.P.
 
petet16's Avatar
 
Join Date: Aug 2007
Posts: 9,239
petet16 is a splendid one to beholdpetet16 is a splendid one to beholdpetet16 is a splendid one to beholdpetet16 is a splendid one to beholdpetet16 is a splendid one to beholdpetet16 is a splendid one to beholdpetet16 is a splendid one to beholdpetet16 is a splendid one to beholdpetet16 is a splendid one to beholdpetet16 is a splendid one to behold
I've seen both types fitted to Rovers, and have also found that it fits one of the holes in the carrier better than the other

Are Robin and Catwoman an item
__________________
------------------------------
theMGZS.co.uk Admin
------------------------------
__________________
It never got fast enough for me
Hunter S Thompson

R.I.P. Peter David Scott 18.07.59 to 21.11.16
Will be missed by us all but we will always remember you.

petet16 is offline   Reply With Quote
Old 14-07-12, 11:41 AM   #5
Smokey
The Alan Gow of OBTCC
 
Smokey's Avatar
 
Join Date: Aug 2007
Location: Dundee
Posts: 8,557
Smokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to behold
Pete, it was a slightly stickier proposition in one hole than the other (ooer missus!)

I assume removing it is fine then and hopefully the brakes will be free to move now? Would I be right about my diagnosis?

And Peter, I used Carlube copper grease. I think it does eventually dry out but if I redo them every 4-6 months I'm not concerned. I did them when I got the car and they were free moving today.
__________________
------------------------------
theMGZS.co.uk Supporter
------------------------------
__________________
------------------------------
theMGZS.co.uk Supporter
------------------------------
__________________
------------------------------
theMGZS.co.uk Supporter
------------------------------
__________________


2009 Forza 2 theMGZS.co.uk OBTCC 2nd Place Runner-up
2009/2010 Forza 3 theMGZS.co.uk OBTCC/Clio Cup 4th Place
2010 Forza 3 theMGZS.co.uk OBTCC/F500 Cup 2nd Place Runner-up
2011 Forza 3 theMGZS.co.uk OBTCC/Driver's Championship 3rd Place
2012 Forza 4 theMGZS.co.uk OBTCC/Driver's Championship 1st Place Winner
2012/2013 Forza 4 theMGZS.co.uk OBTCC/DTM Championship 3rd Place
Smokey is offline   Reply With Quote
Old 14-07-12, 11:45 AM   #6
petet16
Technical Expert R.I.P.
 
petet16's Avatar
 
Join Date: Aug 2007
Posts: 9,239
petet16 is a splendid one to beholdpetet16 is a splendid one to beholdpetet16 is a splendid one to beholdpetet16 is a splendid one to beholdpetet16 is a splendid one to beholdpetet16 is a splendid one to beholdpetet16 is a splendid one to beholdpetet16 is a splendid one to beholdpetet16 is a splendid one to beholdpetet16 is a splendid one to behold
I think it'll be fine as you have it now.
__________________
------------------------------
theMGZS.co.uk Admin
------------------------------
__________________
It never got fast enough for me
Hunter S Thompson

R.I.P. Peter David Scott 18.07.59 to 21.11.16
Will be missed by us all but we will always remember you.

petet16 is offline   Reply With Quote
Old 14-07-12, 11:51 AM   #7
Smokey
The Alan Gow of OBTCC
 
Smokey's Avatar
 
Join Date: Aug 2007
Location: Dundee
Posts: 8,557
Smokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to behold
Cool, cheers. Will know on the drive to Knockhill if this is what caused the slight pull from the steering.
__________________
------------------------------
theMGZS.co.uk Supporter
------------------------------
__________________
------------------------------
theMGZS.co.uk Supporter
------------------------------
__________________
------------------------------
theMGZS.co.uk Supporter
------------------------------
__________________


2009 Forza 2 theMGZS.co.uk OBTCC 2nd Place Runner-up
2009/2010 Forza 3 theMGZS.co.uk OBTCC/Clio Cup 4th Place
2010 Forza 3 theMGZS.co.uk OBTCC/F500 Cup 2nd Place Runner-up
2011 Forza 3 theMGZS.co.uk OBTCC/Driver's Championship 3rd Place
2012 Forza 4 theMGZS.co.uk OBTCC/Driver's Championship 1st Place Winner
2012/2013 Forza 4 theMGZS.co.uk OBTCC/DTM Championship 3rd Place
Smokey is offline   Reply With Quote
Old 14-07-12, 11:51 AM   #8
Fred68
Member
 
Fred68's Avatar
 
Join Date: Feb 2012
Location: Near Newquay
Posts: 654
Fred68 has a spectacular aura aboutFred68 has a spectacular aura about
Quote:
Originally Posted by Smokey View Post
Pete, it was a slightly stickier proposition in one hole than the other (ooer missus!)

I assume removing it is fine then and hopefully the brakes will be free to move now? Would I be right about my diagnosis?

And Peter, I used Carlube copper grease. I think it does eventually dry out but if I redo them every 4-6 months I'm not concerned. I did them when I got the car and they were free moving today.
Sometimes the pin fit around the rubber boot is so good a vacuum is created as you pull it out! If you clean off the copper grease and use CV joint grease instead you will only need to re-grease every year say before the mot!!
__________________
Ex ZS180 Owner and fan.
Fred68 is offline   Reply With Quote
Old 14-07-12, 11:55 AM   #9
Smokey
The Alan Gow of OBTCC
 
Smokey's Avatar
 
Join Date: Aug 2007
Location: Dundee
Posts: 8,557
Smokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to behold
I probably will next time Fred. Although I will be keeping up regular maintenance to be safe as it only ever gets thrashed on track and some of the guys brake waaay more than I do!!
__________________
------------------------------
theMGZS.co.uk Supporter
------------------------------
__________________
------------------------------
theMGZS.co.uk Supporter
------------------------------
__________________
------------------------------
theMGZS.co.uk Supporter
------------------------------
__________________


2009 Forza 2 theMGZS.co.uk OBTCC 2nd Place Runner-up
2009/2010 Forza 3 theMGZS.co.uk OBTCC/Clio Cup 4th Place
2010 Forza 3 theMGZS.co.uk OBTCC/F500 Cup 2nd Place Runner-up
2011 Forza 3 theMGZS.co.uk OBTCC/Driver's Championship 3rd Place
2012 Forza 4 theMGZS.co.uk OBTCC/Driver's Championship 1st Place Winner
2012/2013 Forza 4 theMGZS.co.uk OBTCC/DTM Championship 3rd Place
Smokey is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 02:25 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ? 2010 theMGZS.co.uk