![Reply](http://www.themgzs.co.uk/vb/images/buttons/reply.gif) |
|
15-08-12, 11:36 PM
|
#11
|
Member
Join Date: Jul 2012
Location: Naaaaaarwich
Posts: 52
|
Some jump leads just can't carry enough current to start a V6. I have 2 sets, one is a cheap supermarket type set, very thin cables and small clips, the others are heavy duty ones that could jump a truck! Both times I've tried using the small ones they've done nothing except for get very hot whereas the big ones never fail
Of course it could be a weak earth, are you connecting the neg to the batter or the car's body? It does sound more like a battery / earth problem then a starter though.
__________________
Guru - aka James!
Current Fleet
1991 mk1c Rover Sterling
2003 mk1 ZT-T with LPG
2004 mk2 ZS 180 with LPG
1999 Jeep Grand Cherokee with LPG
|
|
|
15-08-12, 11:36 PM
|
#12
|
technically an expertish
Join Date: Jun 2008
Location: Clydebank, Glasgow
Posts: 7,902
|
Can take a few minutes to charge up from jump leads
__________________
------------------------------
![theMGZS.co.uk Admin](https://www.themgzs.co.uk/images/signatures/expert.jpg)
------------------------------
|
|
|
15-08-12, 11:54 PM
|
#13
|
Member
Join Date: Jul 2012
Location: Naaaaaarwich
Posts: 52
|
If it takes a few minutes you're probably not using the right leads or a beefy enough power supply ![Wink](http://www.themgzs.co.uk/vb/images/smilies/wink.gif)
Obviously with thin jump leads be very careful about leaving them connected for any length of time as they will get pretty hot and at worse could cause a fire or other bad things.
__________________
Guru - aka James!
Current Fleet
1991 mk1c Rover Sterling
2003 mk1 ZT-T with LPG
2004 mk2 ZS 180 with LPG
1999 Jeep Grand Cherokee with LPG
|
|
|
16-08-12, 08:29 AM
|
#14
|
Member
Join Date: Jun 2011
Location: Great Yarmouth
Posts: 933
|
What battery can go into a 180? Voltage etc?
__________________
![](http://mefi.us/images/fuelly/smallsig-uk/138129.png) <!-- Facebook Badge START --><a href="https://www.facebook.com/Johnwaynesboots" target="_TOP" style="font-family: "lucida grande",tahoma,verdana,arial,sans-serif; font-size: 11px; font-variant: normal; font-style: normal; font-weight: normal; color: #3B5998; text-decoration: none;" title="Kirk Sherratt">Kirk Sherratt</a><span style="font-family: "lucida grande",tahoma,verdana,arial,sans-serif; font-size: 11px; line-height: 16px; font-variant: normal; font-style: normal; font-weight: normal; color: #555555; text-decoration: none;"> | </span><a href="http://www.facebook.com/badges/" target="_TOP" style="font-family: "lucida grande",tahoma,verdana,arial,sans-serif; font-size: 11px; font-variant: normal; font-style: normal; font-weight: normal; color: #3B5998; text-decoration: none;" title="Make your own badge!">Create your badge</a><br/><a href="https://www.facebook.com/Johnwaynesboots" target="_TOP" title="Kirk Sherratt"><img src="https://badge.facebook.com/badge/1011934393.3054.324244859.png" style="border: 0px;" /></a><!-- Facebook Badge END -->
|
|
|
16-08-12, 01:41 PM
|
#15
|
Member
Join Date: Jun 2011
Location: Great Yarmouth
Posts: 933
|
As above, I need to know what battery I can use to go in my car, I am waiting to go to the scrappies, need some info peeps if possible
__________________
![](http://mefi.us/images/fuelly/smallsig-uk/138129.png) <!-- Facebook Badge START --><a href="https://www.facebook.com/Johnwaynesboots" target="_TOP" style="font-family: "lucida grande",tahoma,verdana,arial,sans-serif; font-size: 11px; font-variant: normal; font-style: normal; font-weight: normal; color: #3B5998; text-decoration: none;" title="Kirk Sherratt">Kirk Sherratt</a><span style="font-family: "lucida grande",tahoma,verdana,arial,sans-serif; font-size: 11px; line-height: 16px; font-variant: normal; font-style: normal; font-weight: normal; color: #555555; text-decoration: none;"> | </span><a href="http://www.facebook.com/badges/" target="_TOP" style="font-family: "lucida grande",tahoma,verdana,arial,sans-serif; font-size: 11px; font-variant: normal; font-style: normal; font-weight: normal; color: #3B5998; text-decoration: none;" title="Make your own badge!">Create your badge</a><br/><a href="https://www.facebook.com/Johnwaynesboots" target="_TOP" title="Kirk Sherratt"><img src="https://badge.facebook.com/badge/1011934393.3054.324244859.png" style="border: 0px;" /></a><!-- Facebook Badge END -->
|
|
|
16-08-12, 02:20 PM
|
#16
|
Site Owner
Join Date: Jul 2007
Location: Waterlooville, Hants
Posts: 24,096
|
60/63 AH one, 12v of course. Code 063 I believe.
__________________
------------------------------
![theMGZS.co.uk Admin](https://www.themgzs.co.uk/images/signatures/siteowner.jpg)
------------------------------
__________________
Some useful links:
|
|
|
16-08-12, 04:05 PM
|
#17
|
Member
Join Date: Jun 2011
Location: Great Yarmouth
Posts: 933
|
Thanks Mick,
Managed to source one from a scrappy for £15, they did say they had tested it but I did it myself anyway and it's sitting at a healthy 12.44 (ish).
The CCA of my old one was only 440 ![Yikes](http://www.themgzs.co.uk/vb/images/smilies/yikes.gif) This one is 590 so should be enough. Strangely tho, the car started today with no problems which just confirms to me what some people were saying all along.
Thanks to everyone, it's nice to be part of such a friendly forum
P.S. Car seems to run better, but I'm sure that's just the placebo effect haha
__________________
![](http://mefi.us/images/fuelly/smallsig-uk/138129.png) <!-- Facebook Badge START --><a href="https://www.facebook.com/Johnwaynesboots" target="_TOP" style="font-family: "lucida grande",tahoma,verdana,arial,sans-serif; font-size: 11px; font-variant: normal; font-style: normal; font-weight: normal; color: #3B5998; text-decoration: none;" title="Kirk Sherratt">Kirk Sherratt</a><span style="font-family: "lucida grande",tahoma,verdana,arial,sans-serif; font-size: 11px; line-height: 16px; font-variant: normal; font-style: normal; font-weight: normal; color: #555555; text-decoration: none;"> | </span><a href="http://www.facebook.com/badges/" target="_TOP" style="font-family: "lucida grande",tahoma,verdana,arial,sans-serif; font-size: 11px; font-variant: normal; font-style: normal; font-weight: normal; color: #3B5998; text-decoration: none;" title="Make your own badge!">Create your badge</a><br/><a href="https://www.facebook.com/Johnwaynesboots" target="_TOP" title="Kirk Sherratt"><img src="https://badge.facebook.com/badge/1011934393.3054.324244859.png" style="border: 0px;" /></a><!-- Facebook Badge END -->
Last edited by KirkJames; 16-08-12 at 04:08 PM.
|
|
|
16-08-12, 05:03 PM
|
#18
|
technically an expertish
Join Date: Jun 2008
Location: Clydebank, Glasgow
Posts: 7,902
|
Quote:
Originally Posted by guru
If it takes a few minutes you're probably not using the right leads or a beefy enough power supply ![Wink](http://www.themgzs.co.uk/vb/images/smilies/wink.gif)
Obviously with thin jump leads be very careful about leaving them connected for any length of time as they will get pretty hot and at worse could cause a fire or other bad things.
|
Depends how flat the battery is, if its mega flat will take a minute to cgarge up, better to let it vharge first then try it otherwise your drawing probably over 60Amp through the leads and your own alt/battery
__________________
------------------------------
![theMGZS.co.uk Admin](https://www.themgzs.co.uk/images/signatures/expert.jpg)
------------------------------
|
|
|
16-08-12, 10:33 PM
|
#19
|
Member
Join Date: Jul 2012
Location: Naaaaaarwich
Posts: 52
|
Quote:
Originally Posted by Ritchy
Depends how flat the battery is, if its mega flat will take a minute to cgarge up, better to let it vharge first then try it otherwise your drawing probably over 60Amp through the leads and your own alt/battery
|
That maybe true, but most people will use poundland jump leads which after a minute will be cooking, so may be a little dangerous to advise that. With my big leads I'm yet to find anything that wouldn't start first time and that includes my Rover Sterling which started first hit after being sat for over 3 years and so way very flat! I do follow the old advice though of turning on the lights, fans, demister etc in the source car to mop up the additional current when you disconnect the cars.
__________________
Guru - aka James!
Current Fleet
1991 mk1c Rover Sterling
2003 mk1 ZT-T with LPG
2004 mk2 ZS 180 with LPG
1999 Jeep Grand Cherokee with LPG
|
|
|
16-08-12, 10:46 PM
|
#20
|
Member
Join Date: Jun 2011
Location: Great Yarmouth
Posts: 933
|
I've never had a problem starting it with run of the mill leads before. I do now have some heavy duty leads so will use them in future just in case
__________________
![](http://mefi.us/images/fuelly/smallsig-uk/138129.png) <!-- Facebook Badge START --><a href="https://www.facebook.com/Johnwaynesboots" target="_TOP" style="font-family: "lucida grande",tahoma,verdana,arial,sans-serif; font-size: 11px; font-variant: normal; font-style: normal; font-weight: normal; color: #3B5998; text-decoration: none;" title="Kirk Sherratt">Kirk Sherratt</a><span style="font-family: "lucida grande",tahoma,verdana,arial,sans-serif; font-size: 11px; line-height: 16px; font-variant: normal; font-style: normal; font-weight: normal; color: #555555; text-decoration: none;"> | </span><a href="http://www.facebook.com/badges/" target="_TOP" style="font-family: "lucida grande",tahoma,verdana,arial,sans-serif; font-size: 11px; font-variant: normal; font-style: normal; font-weight: normal; color: #3B5998; text-decoration: none;" title="Make your own badge!">Create your badge</a><br/><a href="https://www.facebook.com/Johnwaynesboots" target="_TOP" title="Kirk Sherratt"><img src="https://badge.facebook.com/badge/1011934393.3054.324244859.png" style="border: 0px;" /></a><!-- Facebook Badge END -->
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT. The time now is 03:38 PM.
|