T-16 into a Mark 2 ZS
I'll be taking the ZS off the road soon for abit of a restoration and I'll be swapping out the little 1.4 k-series for a T-16. Apart from the engine, gearbox, Rover 420 engine mounts and drive shafts what will I need? Also has anyone who has done a T-16 swap with a Mk2 ZS or ZR had much bother with it in terms of the MEMS 3 ECU and the Pektron BCU/SCU set up or with the wiring loom, any help is appreciated. Cheers guys
|