Which Gasket?

KirkJames · 20-04-14, 07:00 PM

Can anyone put up a link or two of which gaskets I will need if I am replacing the rear bank exhaust manifold, also where it then connects to the flexi after the rear bank collector and finally where it meets the front exhaust manifold. I think that's all I need for replacing the rear bank collector. Could anyone point me in the right direction please.

MG ZS STE · 20-04-14, 08:39 PM

#3, I used grease on the unions that you can see in the illustration and I reused the gasket where it joins the cat. I think I got my #3s cheaper off eBay by searching for freelander manifold gaskets.

http://www.rimmerbros.co.uk/Item--i-GRID003328

KirkJames · 22-04-14, 07:57 AM

Cheers buddy, that's great.

KirkJames · 12-05-14, 01:00 PM

Is that all I should need as the old bolts etc may be knackered. Don't want to start the job and then find out I need more parts

talkingcars · 12-05-14, 05:43 PM

They are standard gaskets that any exhaust centre will have on the shelf.

KirkJames · 13-05-14, 08:45 AM

Quote:

Originally Posted by talkingcars

They are standard gaskets that any exhaust centre will have on the shelf.

Even the manifold where it connects to the engine? Or just the smaller ones in the exhaust

petet16 · 13-05-14, 08:52 AM

Just the smaller ones in the system, if you need manifold gaskets a motor factor will be able to supply them.

KirkJames · 13-05-14, 08:53 AM

Quote:

Originally Posted by petet16

Just the smaller ones in the system, if you need manifold gaskets a motor factor will be able to supply them.

Cheers Pete!!

talkingcars · 13-05-14, 09:17 AM

Sorry, just read the first post, the exhaust gaskets are universal, not sure about manifold ones.