anyone breaking a 180 ATM

MG ZS STE · 19-05-16, 10:25 AM

I need the plug from the loom end for the 02 sensor from bank 2 sensor 1, with about 3 to 4” of loom left on. You can get access to this easily from the left side of the engine (facing the car) near the rear cam cover.

Mine got ripped out when it got wrapped around the drive shaft. I had a spare 02 sensor but the wires were damaged on the loom side of the plug so I need to cut the old plug off and solder on a new one.

talkingcars · 19-05-16, 11:26 AM

Might be easier to get hold of pair of plugs and replace both sides, plenty of waterproof ones on ebay for motor bikes.

grimmy · 19-05-16, 12:14 PM

Typical.I threw a whole loom in the bin last week.

talkingcars · 19-05-16, 08:59 PM

Quote:

Originally Posted by grimmy

Typical.I threw a whole loom in the bin last week.

and I might have given you money for it too........

MG ZS STE · 19-05-16, 09:18 PM

Got one, found a guy on eBay that was breaking one 4.5 miles down the road. But thanks for the help, appreciated.