wiring diagram needed! possible mk2 fix

redzed · 31-07-13, 05:33 PM

hi guys,

got a problematic scu unit which is causing my drivers window to not work. was going to put in a mk1 unit like this one

http://www.ebay.co.uk/itm/ROVER-45-M...item1e7d1a856c

anyone know where i can get a wiring diagram for this so i can work out how to fit it into the mk2,

cheers guys, if it works i'll post a how to

mrmick · 31-07-13, 05:47 PM

Had same prob with my wifes zs mk2 ended up changing the lot was a quicker fix now all working spot on

redzed · 31-07-13, 06:07 PM

changing the lot as in ecu scu, fobs etc?

petet16 · 31-07-13, 06:12 PM

I wouldn't bother trying to make a mk1 unit work, you can replace the relays in the mk2 unit but you'll need to be handy with a soldering iron.

petet16 · 31-07-13, 06:18 PM

http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=161065886113

mrmick · 31-07-13, 06:55 PM

Yes all of them half hour and sorted

talkingcars · 31-07-13, 07:16 PM

The box is for the 1 shot function on the drivers door, TBH I thought the mk2 would have one as well.

redzed · 31-07-13, 10:21 PM

Changed a relay in the scu already and it hasn't solved it, well I changed the one which was meant to be drivers door and clearly it wasn't as its got the clicking noise from the unit which suggests its that. I want the one click down function and the mk1 ha the relay in the door. I'm taking the live wire from the mirror. Any idea where I can get the diagram for that mk1 unit?

talkingcars · 31-07-13, 10:41 PM

Had my cards off tonight, the box is not on the mk2.

talkingcars · 31-07-13, 10:44 PM

If you are going to use it I would get a loom from a mk1 door and then add a power feed from the fusebox.