It is little clips that go onto the bumper holding the fog light holder in place. i had mine off not that long ago when i put the fogs in mine. You may have lost the clips when you hit the rabbit, so you many need to get some from rimmers or xpart.
Stephen
__________________
LIFE'S TOO SHORT NOT TOO
Moonshine ZS 180
Glacier ZS 180
Twilight ZT 190 SE
Sunspot ZT-T 180
Dark Fantasy 75 Tourer
Blue MG5 EV
You may be able to put your hand down with the bonnet open, but id take the bumper off. 4 nuts when you open the bonnet, 4 underneath and 2 either side. Watch you dont unscrew the wing bolts instead as you may get mixed up and remember to disconnect the fog lights when you pull the bumper away.
Stephen
__________________
LIFE'S TOO SHORT NOT TOO
Moonshine ZS 180
Glacier ZS 180
Twilight ZT 190 SE
Sunspot ZT-T 180
Dark Fantasy 75 Tourer
Blue MG5 EV
Me and Marcus both had the http://www.rimmerbros.co.uk/Item--i-DYC101360 clips on ours when we had the bumpers off. Are you talking about the Coloured caps that are screwed into the holder. if you remove them you can fit the fogs?
__________________
LIFE'S TOO SHORT NOT TOO
Moonshine ZS 180
Glacier ZS 180
Twilight ZT 190 SE
Sunspot ZT-T 180
Dark Fantasy 75 Tourer
Blue MG5 EV
mark 2 has screws for the blanks, or that hold the fog onto the bracket, then wee clips that hold the actual bracket to the bumper, theyll probably bee sat on the undertray still