Do all models come with full wiring loom?

[wu11ie]

Originally Posted by Bakermgzs

To be honest mate I would first take bumper off see if the wires are there if thay are which I'm pretty sure thay will be then just buy a fog bulb first and see if turns on if it does then buy rest of what you need to finish the job
Quick question do you have a switch inside the car to turn them on? That's only thing I'd be worried about

That was my thinking till I saw I had no switch lol, had a look on ebay and there's a full set of fogs, relay and switch for £30, I just didn't want to shell out the £30 if they're no use to me so I thought I'd ask the experts

Sent from my HTC One_M8 using Tapatalk

[Mark S]

Originally Posted by wu11ie

TI just didn't want to shell out the £30 if they're no use to me

budget 30quid for the parts and 40quid to turn it on in the bcu if needed and decide if its worth 70quid to you or not, that'll be the headline cost.

[wu11ie]

Originally Posted by M17TT180

All mk2 will have full loom, very late mk1's too. Easiest way to check is if you have a black plug under the front seats or 5 wires going into the rear doors.

I'll have a look, thanks.

Originally Posted by LukeZS96

yeah all MK2's have a full loom and the wiring for the switch is behind the centre console, it's fairly handy to retrofit front fogs if you can get the T4 software

Is it possible to get the software?

Originally Posted by Mark S

budget 30quid for the parts and 40quid to turn it on in the bcu if needed and decide if its worth 70quid to you or not, that'll be the headline cost.

The cars not worth enough to spend £70 fitting fog lights, I was reluctant at £30 lol

Sent from my HTC One_M8 using Tapatalk