Heated washer jets?

[KevG]

Originally Posted by RudeDogg1

what needs to be done to fit ford ones?

What you need is a 12v source, MGR recommend the live feed for the wiper motor fused with a 7.5amp fuse, I followed this, but the heaters on the jets are on all the time.
I replaced the connectors on the Ford jets with some from an autoshop, and wired them in, you will also need the dimensions for fettling your bonnet (I will post up later)
Just goto you nearest Ford dealer and ask the parts monkey get you some heated washer jets from a 1998>2004 Ford Focus/Mondeo(I'll try and get the Finis Code for them)

[RudeDogg1]

:s sounds like to much hastle

[KevG]

Looks like you a wee bit afraid of some graft , a useful mod if done.

[RudeDogg1]

lol more afraid of fooking something up i prefer an easy option

[RudeDogg1]

If youve got a how to i might give it a wirl

[KevG]

Its not that hard, I don't have a "How to....", it is just a bit of common sense, measuring, you don't cut anything just use needle/swiss files and do it that way, just file and check, file and check easy

[arwilson80]

Originally Posted by KevG

You have just answered your own question!!!

Just checking.

Originally Posted by KevG

It's not such a widely known fact that warm water actually works better with your washer fluid than cold water, plus if you have the correct screen wash mix then your washers will never freeze unless your living in the artic circle then it is almost a 10/90 mix

I keep mine about a 50/50 mix