Quote:
Originally Posted by lukiep160
new mcguard locking wheel nut tools can be got from any rover dealer, they have a master key set incase you don't have the wheel nut tool number.
And yes the tools are ****e
|
Not as sh*te as the old ones on a Mk1.
That was a smooth cylinder with a key cut in to the side. Only problem was the remover was made from a piece of wire soldered to the inside of a smooth cup.
After one wheel was removed you were luck to get a second wheel off. I went through 3 of them in time I had the MK1.
That was even with refitting the nuts finger tight and a quarter turn.
Threaded Mode