theMGZS.co.uk   Navigation

AboutNews Flyers Forum Events Home

Home
Go Back   theMGZS.co.uk :: MG ZS forum > Technical Area > Build Projects > Smokey's site track day car

Reply
 
Thread Tools Display Modes
Old 14-07-12, 10:41 AM   #1
Smokey
The Alan Gow of OBTCC
 
Smokey's Avatar
 
Join Date: Aug 2007
Location: Dundee
Posts: 8,557
Smokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to beholdSmokey is a splendid one to behold
Pete, it was a slightly stickier proposition in one hole than the other (ooer missus!)

I assume removing it is fine then and hopefully the brakes will be free to move now? Would I be right about my diagnosis?

And Peter, I used Carlube copper grease. I think it does eventually dry out but if I redo them every 4-6 months I'm not concerned. I did them when I got the car and they were free moving today.
__________________
------------------------------
theMGZS.co.uk Supporter
------------------------------
__________________
------------------------------
theMGZS.co.uk Supporter
------------------------------
__________________
------------------------------
theMGZS.co.uk Supporter
------------------------------
__________________


2009 Forza 2 theMGZS.co.uk OBTCC 2nd Place Runner-up
2009/2010 Forza 3 theMGZS.co.uk OBTCC/Clio Cup 4th Place
2010 Forza 3 theMGZS.co.uk OBTCC/F500 Cup 2nd Place Runner-up
2011 Forza 3 theMGZS.co.uk OBTCC/Driver's Championship 3rd Place
2012 Forza 4 theMGZS.co.uk OBTCC/Driver's Championship 1st Place Winner
2012/2013 Forza 4 theMGZS.co.uk OBTCC/DTM Championship 3rd Place
Smokey is offline   Reply With Quote
Old 14-07-12, 10:45 AM   #2
petet16
Technical Expert R.I.P.
 
petet16's Avatar
 
Join Date: Aug 2007
Posts: 9,239
petet16 is a splendid one to beholdpetet16 is a splendid one to beholdpetet16 is a splendid one to beholdpetet16 is a splendid one to beholdpetet16 is a splendid one to beholdpetet16 is a splendid one to beholdpetet16 is a splendid one to beholdpetet16 is a splendid one to beholdpetet16 is a splendid one to beholdpetet16 is a splendid one to behold
I think it'll be fine as you have it now.
__________________
------------------------------
theMGZS.co.uk Admin
------------------------------
__________________
It never got fast enough for me
Hunter S Thompson

R.I.P. Peter David Scott 18.07.59 to 21.11.16
Will be missed by us all but we will always remember you.

petet16 is offline   Reply With Quote
Old 14-07-12, 10:51 AM   #3
Fred68
Member
 
Fred68's Avatar
 
Join Date: Feb 2012
Location: Near Newquay
Posts: 654
Fred68 has a spectacular aura aboutFred68 has a spectacular aura about
Quote:
Originally Posted by Smokey View Post
Pete, it was a slightly stickier proposition in one hole than the other (ooer missus!)

I assume removing it is fine then and hopefully the brakes will be free to move now? Would I be right about my diagnosis?

And Peter, I used Carlube copper grease. I think it does eventually dry out but if I redo them every 4-6 months I'm not concerned. I did them when I got the car and they were free moving today.
Sometimes the pin fit around the rubber boot is so good a vacuum is created as you pull it out! If you clean off the copper grease and use CV joint grease instead you will only need to re-grease every year say before the mot!!
__________________
Ex ZS180 Owner and fan.
Fred68 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 10:10 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ? 2010 theMGZS.co.uk