Mg zs air brake

[Skillen]

Originally Posted by buff-1

thats looks good and im not goina hate it but at times it looks juggerdy

Not only that, but it bashes the paintwork on its leading edge!

[buff-1]

mines wont be hittin the paint or damaging the body. should be a good design and hopefully one will he made for a hatch for sneekyparrot.

[Skillen]

Originally Posted by buff-1

mines wont be hittin the paint or damaging the body. should be a good design and hopefully one will he made for a hatch for sneekyparrot.

something very wrong if you get a saloon wing to hit the car haha!

looking forward to more updates!

[buff-1]

thanks hope they come out soon and i might fall off but i dont want it to. (it wont though)

[buff-1]

below shows the pins cut to their required lenghts (made out of aluminium). the pins being turned down on the lathe. the frame and the brackets welding together although they need to be cleaned up but that will come at the end stages of the project. the diameter of the aluminium pins is 6mm and the bars that are made from steel are to be turned down to 10mm but i might be manufacuring them out of titinium.
these are the only pictures i can upload now as i have to crop all of my pictures from my iphone so that they can be posted here, will update soon thanks for all the intrest.

[buff-1]

the below link is a video which i posted today which has one of the two actuators showing it working.
http://www.youtube.com/watch?nomobile=1&v=P3Bl2H-zjx8

[buff-1]

pictures have been posted to xpowerfourms showing limit switches being fitted. will post here tonight.

[buff-1]

right firstly sorry i havent updated in a while im in a rush to get this whole thing finished and the rest of my course for the end of the year and trhe project has to be finished for the 21st of may as i am planning on going to an award competition called the BEST awards and hopefully ahve an chance at winning. I have lots of photos of what i have done, list of things that have been completed.

Full circuit wired up( actuators move up and stop at limit switches and move down at stop at limit switches all controlled by the brake light switch and the relays.)
Banks( Sides of spoiler manufactured) middle to be made very soon
brakets made,
pins made
holes cut in boot lid
L brackets made to join the spoiler to the bootlid along with expoxy resin

the spoiler will still have to be sanded down to give me the finish that i can best acheive with this type of moulding. i shall have all of the pictures that i have some time to transfer from fone to computer, if anyone is intrested in one pm me and i can do my best to help out

[POMPSKI]

Looking forward to seeing the finished item

[talkingcars]

Originally Posted by buff-1

.......... i shall have all of the pictures that i have some time to transfer from fone to computer, if anyone is intrested in one pm me and i can do my best to help out

tease - need a video as well.