Rave digital copy.

[Jay-ZS+]

Anyone got a link to a digital copy of RAVE? Need to change my rear wheel bearing and thought Id have a ganders before starting. Or even a workshop manual would do. My copy of that seems corrupt.

Got it on disc but my new netbook doesnt have a disc drive. :slap:

Hope this isnt a copy write issue, cant imagine MG are too fused about it now anyway.

[Jay-ZS+]

Found it in haynes, seems its an easy job as the bearing comes fitted to the hub so not need to beat them apart :)

A copy would still be handy for future use if anyone has one. :thumbsup:

[KevG]

I had a copy in dropbox, will see if it is still there and I'll give you the address.

[Jay-ZS+]

I had a copy in dropbox, will see if it is still there and I'll give you the address.

Cheers Kev :)

[petet16]

This one used to be free, it looks like you have to pay now http://www.mgrover-online.com/

[petet16]

180Nm for the hub nut

[Jay-ZS+]

180Nm for the hub nut

So thats about hand tight plus 55% bodyweight! :cowboy:

[petet16]

So thats about hand tight plus 55% bodyweight! :cowboy:


Approximately that is correct

[Jay-ZS+]

Approximately that is correct

With a 400mm ratchet and 85kg bodyweight its pretty close ;)

[petet16]

159Nm ?

[KevG]

Invite to dropbox (http://db.tt/w5bBOj1)
https://www.dropbox.com/sh/shvpz7ck390nlfm/qJxqCBFIeF

[Jay-ZS+]

159Nm ?

85kg * 9.81 (gravity) * 0.55(%) = 458.6 * 0.4(length of bar) = 183.45Nm

Can you tell Im in the middle of exams and bored of revising? lol

[Jay-ZS+]

Invite to dropbox (http://db.tt/w5bBOj1)
https://www.dropbox.com/sh/shvpz7ck390nlfm/qJxqCBFIeF

Spot on cheers Kev :D

Tried to rep you but I have to spread it about abit first

[petet16]

85kg * 9.81 (gravity) * 0.55(%) = 458.6 * 0.4(length of bar) = 183.45Nm

Can you tell Im in the middle of exams and bored of revising? lol

Well done, good answer, you passed that test:smile1:

[talkingcars]

That's neat Kev, do you mind if I drop them down?

James