theMGZS.co.uk  :: MG ZS forum

theMGZS.co.uk :: MG ZS forum (https://www.themgzs.co.uk/vb/index.php)
-   Build Projects (https://www.themgzs.co.uk/vb/forumdisplay.php?f=105)
-   -   Project Copperleaf! (https://www.themgzs.co.uk/vb/showthread.php?t=16464)

skyblueads 24-03-11 10:34 PM

Project Copperleaf!
 
Well I thought I'd get a thread going on the car now I'm back online at home!

When I picked it up:

http://img822.imageshack.us/img822/1810/img0937e.jpg

http://img853.imageshack.us/img853/7774/img0934wu.jpg

http://img11.imageshack.us/img11/4073/img0935rq.jpg

No miles:

http://img683.imageshack.us/img683/8859/img0939u.jpg

Having cleaned it:

http://img813.imageshack.us/img813/5...5eff07fd2b.jpg


ZS grille freshly painted and reassembled:

http://img23.imageshack.us/img23/3906/img0985h.jpg

The grille was a nightmare since the paint previously used (silver) must've been cellulose, it didn't like the acrylic! After a good rub back I found Trophy blue beneath that which I gave a couple coats of high build primer too, then normal primer, paint and lacquer. Be interesting to see how well it matches the colour. I've not attached the badge to the grille yet in case I'm not happy with the match...

Ritchy 24-03-11 10:43 PM

keep us updated looks interesting:)

Taphouse 25-03-11 05:28 AM

Posting the dials this morning :-)

What other plans have you got?

skyblueads 25-03-11 09:24 AM

Ah great, thanks mate!

I've got a set of 17" straights to go on, and a set of hatch seats to collect, as well as ZS dash trim and an MG wheel and airbag. I've got all the MG badging too to go on...

The most important thing is to get the correct ZS handling set-up, in terms of springs, anti-rollbar etc etc... It'll all come in time!

marts66 25-03-11 09:28 AM

Quote:

Originally Posted by skyblueads (Post 202548)
Ah great, thanks mate!

I've got a set of 17" straights to go on, and a set of hatch seats to collect, as well as ZS dash trim and an MG wheel and airbag. I've got all the MG badging too to go on...

The most important thing is to get the correct ZS handling set-up, in terms of springs, anti-rollbar etc etc... It'll all come in time!

Will you not need to change the bushes, I thought I'd read the Zed used different/harder bushes than the 45? Could be wrong though!

fastmike 25-03-11 09:50 AM

What engine is in it ?.... I might have a KV6 with 61 thousand on the clock .... service history and belts changed last year complete with gearbox , ecu rad etc ....

peterzs 25-03-11 10:06 AM

Looks a different car already, sounds like a good project, least you got a full tank when you picked her up.

:yes::yes: :laugh::laugh::laugh:

skyblueads 25-03-11 10:13 AM

Quote:

Originally Posted by marts66 (Post 202549)
Will you not need to change the bushes, I thought I'd read the Zed used different/harder bushes than the 45? Could be wrong though!

I wouldnt be surprised, I am going to get a detailed list of the differences. As for swapping the K4 for a V6, nice idea but way beyond my budget or plans. With just 19k on the 1.8 I am happy to stick with it. A full tank was a welcome bonus, I must admit!

p_b82 25-03-11 10:19 AM

looking good there, that colour is lovely and a bit of a shame they only did it monogram for the MK1's or part of the MK2 range....

looks like it is going to keep you busy for a while :)

skyblueads 25-03-11 01:10 PM

It's a great colour, plus there's loads of little things missing from the ZS, like ignition key illumination and the same for the cigaretter lighter.

Should keep me quiet for a little while, I've missed the sound of a K4...


All times are GMT. The time now is 06:31 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ? 2010 theMGZS.co.uk