theMGZS.co.uk  :: MG ZS forum

theMGZS.co.uk :: MG ZS forum (https://www.themgzs.co.uk/vb/index.php)
-   Members Cars (https://www.themgzs.co.uk/vb/forumdisplay.php?f=17)
-   -   2.0TD L-Series..... (https://www.themgzs.co.uk/vb/showthread.php?t=18938)

Mikeyb85 01-11-11 05:54 PM

2.0TD L-Series.....
 
4 Attachment(s)
I picked up this Rover 45 last week and its about to have a few bits and pieces done to it!

Mainly a little bit of engine tuning, suspension, brakes, trim, paint, body, wheels...

I shall try to upload all the bits and pieces as I go and have a mini blog/diary!

Hope you like my mods to this car :)

peterzs 01-11-11 06:14 PM

Do go well with a few tweaks, clean looking car to work from.

:clap::clap::clap:

Mikeyb85 01-11-11 06:17 PM

Photos online are very deceiving! Its a bit of a dog!

peterzs 01-11-11 06:18 PM

Sure it well end up looking good.

Enright 01-11-11 06:49 PM

You've got a lot of potential there. I like the wheels.
Here's a nice little list for you if you can find the parts:
Fit rear headrests, parking sensors, rear electric windows, seat heaters, headlamp washers, front vented discs, rear solid discs, knock the guts out of the cat, fit a de-restrictive back-box, a K&N panel filter, SDi injectors, a MAP monitor wire, adjust the boost to 19psi...
That should about do it for starters, give you extra comfort and make it a bit of a street-sleeper that will catch a few people unawares! ;)

Mikeyb85 01-11-11 06:59 PM

I have SDI injectors and digimafam sitting at home as car was really poor running below 2500rpm

I have started collecting parts for the rear electric windows, switches, door handles and wiring is sorted! (just got to get motors and mechanisms)

Looking at getting interior from ZS and removing the walnut effect with some tasteful carbon wrapping, and may do the mirrors also.

ZS180 brakes are planned all round!

Exhaust will get a wee visit to stainless creations for them to sort that out :-)

Dan1971 01-11-11 07:20 PM

Couple of decent diesels on the forum mate so plenty of know-how. Looks like a decent little car mate and if a bit rough on the outside an even better sleeper if you ask me.

zsserbia 01-11-11 11:30 PM

Another derv! :mbounce:

Enright 02-11-11 07:50 AM

Quote:

Originally Posted by Mikeyb85 (Post 227448)
I have SDI injectors and digimafam sitting at home as car was really poor running below 2500rpm

I have started collecting parts for the rear electric windows, switches, door handles and wiring is sorted! (just got to get motors and mechanisms)

Looking at getting interior from ZS and removing the walnut effect with some tasteful carbon wrapping, and may do the mirrors also.

ZS180 brakes are planned all round!

Exhaust will get a wee visit to stainless creations for them to sort that out :-)

All of that sounds great! When you go to get your exhaust done, if I were you I would only get either the back-box, or at most back-box and mid section changed.
Apparently the next upcoming changes to MoT regulations will call for a visual check (to see if the cat that should be there still is). However there will be no change to the emissions test so there doesn't actually have to be anything IN the cat!!!
Take the opportunity to bash the innards out and allow your gases to flow more freely - it makes a helluva difference on TD's.

talkingcars 02-11-11 06:51 PM

Next years MOT guidelines were posted up last week by Stamford, unfortunatly section 7.1.3 clearly states that there will will be a visual inspection.

The thread is at http://www.themgzs.co.uk/vb/showthread.php?t=18852


All times are GMT. The time now is 09:29 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ? 2010 theMGZS.co.uk