Skunk LCA's

[petet16]

Yeah, lower shock mount, I did mine ghetto stylee with a die grinder and attadisc, mind yer pinkies

[Maxxed_Ross]

Sorry had brain fade there... it is the shock mount

The anti roll bar mount needs different bolts as the thread is finer

[Skillen]

Seem a bit more work than they are worth (at the full RRP) and I don't know of any engineering firms round me :/
The look cool in black though, and are something I'd want to end up sorting.
These, camber arms, or save up for LSD :/ ???

I've also just seen the brembodge group buy on RT.

I want it all

[stamford]

Just found the drawing of the mods I made that made it work. To me it was the best way. Feel free to use.

[petet16]

Exactly how I did mine Mick, 2.5mm off both ends of the poly bush halves, and 2.5 off each end of the lower shock mounting collar, I used some spare 40mm tubes so didn't bother shortening the ones that came with the arms.

[stamford]

Turning the bush face off was the only naff part as the material is not ideal for machining.

[petet16]

Originally Posted by stamford

Turning the bush face off was the only naff part as the material is not ideal for machining.

I did it with a disc in a die grinder

[Maxxed_Ross]

How I did mine too Mick