Luke Warm Heater

[talkingcars]

Mk1?

I've heard of the control rod failing but don't ask me how.

You could try adjusting the valve that is quite low down on the bulk head if you can get to it.

[petet16]

Also make sure the cable hasn't sprung out of the clip on the drivers side of the heater unit.

[andys1981]

Originally Posted by petet16

Also make sure the cable hasn't sprung out of the clip on the drivers side of the heater unit.

thats what used to happen in my last zs,sounds like that may be the problem

[KirkJames]

Originally Posted by Maxfly

Possibly just the knob that's has broken, iirc they just pull off so easy enough to check and then find a cheap replacment from here or eBay to replace it

Nice one mate, will try that first I think.

Originally Posted by talkingcars

Mk1?

I've heard of the control rod failing but don't ask me how.

You could try adjusting the valve that is quite low down on the bulk head if you can get to it.

Where is that buddy? Any pics?

Originally Posted by petet16

Also make sure the cable hasn't sprung out of the clip on the drivers side of the heater unit.

Same as above matey, where will that be and any pics?